1、 Characteristics

1. Adopting a metal frame, stable and firm.

2. Adopting dual air ducts for heat dissipation, the heat dissipation is more uniform and the effect is better.

3. Support power-off continuation function and material breakage detection function.

4. 3-minute high-speed PLA printing preheating.

5. The Z-axis screw rod bearing is fixed, which is more stable and smooth.

6. Add a simple auxiliary leveling function, allowing the platform to tighten the nut with a large hand, making leveling more convenient and efficient.

7. Mechanical assisted leveling, with multiple detection points from the nozzle to the platform, makes adjusting the nut more convenient and simple.

8. Equipped with a 32-bit main control chip, with a main frequency of 72MHz, it runs very fast.

9. Upgrade firmware and configuration through TF card, adjust driver current using configuration file to avoid burning out the driver caused by manual current adjustment, which is convenient, reliable, and safe.

10. The platform adopts high-temperature resistant bed stickers, which have better printing adhesion and can withstand temperatures up to 80 ℃.

11. The machine adopts a modular semi assembly design, which is easy and fast to install.

2、 Basic parameters

1) Mechanical structure:

Framework: Aluminum gantry double guide rail structure

Printing platform: Aluminum based heating platform

2) Printing parameters:

Printing technology: FDM

Molding size: 235x235x260mm

Printing layer height: 0.05-0.3mm (using 0.4mm nozzle)

Maximum printing speed: 180mm/s (recommended printing speed 30-60mm/s)

Consumable diameter: 1.75mm

Nozzle diameter: 0.4mm

Consumable type: PLA (default) ABS、HIPS、Wood、 Fluorescent consumables, PLA metal consumables, transparent consumables, PLA-CF carbon fiber, PLUS carbon fiber, PETG, Flexible PLA, T-PLA, HCPLA, etc., (default to PLA consumables, printing other consumables with a higher difficulty factor requires experienced operators to use, and the parameters of the corresponding consumables need to be adjusted by themselves. Default printing parameters are not provided)

3) Temperature:

Maximum temperature of extruder: 260 ℃

Maximum temperature of hot bed: 100 ℃

4) Software parameters:

Supported formats: STL, G-Code, AMF, OBJ

Input methods: USB, SD Card

Operating software: Repetier Host, Cura

Operating System: WINDOWS 7 \ \ MAC OS \ \ LINUX

5) Power:

Input: 110/220V, 360W

Output: 24V 15A

6) Size&Weight

Machine size: 440 * 406 * 455mm

Packaging size: 500 * 410 * 180mm

Net weight of machine: 7KG

Consumable type: PLA (default) ABS、HIPS、Wood、 Fluorescent consumables, PLA metal consumables, transparent consumables, PLA-CF carbon fiber, PLUS carbon fiber, PETG, Flexible PLA, T-PLA, HCPLA, etc., (default to PLA consumables, printing other consumables with a higher difficulty factor requires experienced operators to use, and the parameters of the corresponding consumables need to be adjusted by themselves. Default printing parameters are not provided)

3) Temperature:

Maximum temperature of extruder: 260 ℃

Maximum temperature of hot bed: 100 ℃

4) Software parameters:

Supported formats: STL, G-Code, AMF, OBJ

Input methods: USB, SD Card

Operating software: Repetier Host, Cura

Operating System: WINDOWS 7 \ \ MAC OS \ \ LINUX

5) Power:

Input: 110/220V, 360W

Output: 24V 15A

6) Size&Weight

Machine size: 440 * 406 * 455mm

Packaging size: 500 * 410 * 180mm

Net weight of machine: 7KG