Guwei APS-7200/7300 Programmable AC Power Supply-Fornitore globale

Room 1008, Building C, Xinghe Legend Phase III Commercial Building, Lvjing Road, Minzhi Street, Longhua District, Shenzhen

APS-7200/7300 可编程交流电源
APS-7200/7300 Programmable AC Power Supplycharacteristic
• Output capacity: APS-7200(2000VA、310Vrms、16.8Arms)/ APS-7300 (3000VA、310Vrms、25.2Arms)。 The output can be expanded to (0~600Vrms/45~999.9Hz) through optional accessories.
ARB waveform output, Surge/ Dip control
The measurement function includes VOLT CURR、PWR、SVA、IPK、IPKH、FREQ、PF、CF
10 sets of Sequence functions allow editing of output waveforms/10 sets of Simulate mode for fast simulation of power transients/10 sets of Program mode for custom measurement sequence/10 sets of panel memory function
• Support automatic execution of Sequence, Simulate, Program mode, and output functions upon startup
• Standard interface: USB Host, USB Device, LAN
Optional interface: GPIB (APS-001)； RS232(APS-007)
APS-7200/7300

Guwei Electronics has launched the APS-7200&7300 AC power supply. The maximum rated output of APS-7200 is 2000VA and 310Vrms 16.8Arms； APS-7300 is 3000VA, 310Vrms, 25.2Arms, with an output frequency of 45.00~500.0Hz. The output voltage of 0-600Vrms and the output frequency of 45-999.9Hz can be directly expanded at the user end through optional methods, without the need for factory modifications. Suitable for testing and development of AC-DC power supply devices, consumer electronics products, automotive electronics, and electronic components.

APS-7200&7300 have a total of 9 measurement items (Vrms, Irms, F, Ipk, W, VA, PF, Ipk hold, CF) in terms of measurement functions, and provide an approximate AC Power Meter operation interface, suitable for LED industry or standby power consumption measurement. In ARB mode, APS-7200&7300 provide SINE waveform Triangle waveform、Staircase waveform、Clipped Sinewave、Crest factor waveform、Surge waveform And Fourier series has nearly 20000 types of combined waveforms in seven major categories, which can meet the testing needs of various industries in simulating abnormal waveforms of input power supplies. 10 sets of Preset settings, allowing users to store ten sets of settings; The Power ON Output setting allows Sequence, Simulate, and Program to automatically execute output after startup.

In order to meet the testing conditions of common input power supply changes in consumer electronic products, APS-7200&7300 provides five ways to respond to special or abnormal voltage, frequency, and phase changes, with 10 sets of Simulate simulating power interruption, voltage increase, or voltage decrease behavior; 10 sets of sequences for users to customize parameters and generate sine waves through steps editing; 10 sets of programs are used to edit the output of AC waveforms, and can also customize the upper/lower limits of measurement items for different DUTs; Ramp Control allows users to set the speed at which the output voltage rises and falls; Surge/DIP Control can simulate the input power supply of DUT generating a Surge or Dip voltage superimposed on the output voltage waveform at a specific time. APS-7200&7300 not only provide OCP/OPP/OTP protection, but also display the front panel reading in red font to remind users when a voltage current phase difference of 180 degrees (reverse current) is detected at the output end of the back panel. It is suitable for inverter feedback grid testing, where the current measurement results of the feedback grid are displayed.

The APS-7200&7300 backplate Ethernet Port can be remotely programmed, the Sync Output Socket provides 10V output voltage for external synchronization, and the Signal Output connector provides monitoring of program execution results. APS-7200&7300 also provide Trigger In/Out and Output on/off remote control functions, which can be used by customers on the J1 connector on the back panel.

APS-7200/7300 AC power specifications

model			APS-7200	APS-7300
power input
phase			Single Phase
Input power supply			230Vac ± 15%
input frequency			50/60Hz
Maximum current			32A	50A
apparent power			7.2KVA or less	10.8KVA or less
Power factor			0.7 Typ.
AC output
rated power			2000VA	3000VA
Output voltage			0 ~ 155Vrms, 0 ~ 310Vrms
OUTPUT FREQUENCY			45.00 ~ 500.0 Hz
Maximum current (effective value) * 1		0 ~ 155 Vrms	16.8A	25.2A
		0 ~ 310 Vrms	8.4A	12.6A
Maximum current (peak value)		0 ~ 155 Vrms	Peak value which is four times of the maximum current
		0 ~ 310 Vrms	Peak value which is four times of the maximum current
phase			Single Phase, Two Wire (1P2W)
Total Harmonic Distortion (THD) * 2			≤ 0.5% at 45 ~ 500.0Hz (Resistive Load)
crest factor			≧ 4
Power regulation rate			0.1% (% of full scale)
Load regulation rate			0.5% (% of full scale)
reaction time			< 100µS
Reverse Current			30% of Maximum Output RMS Current (Continue) 100% of Maximum Output RMS Current (Within 3 minutes)
setting
voltage	range		0 ~ 155Vrms, 0 ~ 310Vrms, Auto
	resolution		0.01V at 0.00 ~ 99.99Vrms 0.1V at 100.0 ~ 310.0Vrms
	accuracy		± (0.5% of setting + 2 counts)
frequency	range		45 ~ 500 Hz
	resolution		0.01Hz at 45.00 ~ 99.99Hz 0.1Hz at 100.0 ~ 500.0Hz
	accuracy		± 0.02% of Setting
Power on/off phase angle		range	0 ~ 359°
		resolution	1°
		accuracy	± 1° (Only 45 ~ 65Hz)
*Measurement 3**
Voltage (effective value)	range		0.20 ~ 38.75Vrms 38.76 ~ 77.50Vrms 77.51 ~ 155.0Vrms 155.1 ~ 310.0Vrms
	resolution		0.01V at 0.00 ~ 99.99Vrms 0.1V at 100.0 ~ 310.0Vrms
	Accuracy * 4		± (0.5% of reading + 2 counts)
frequency	range		45 ~ 500Hz
	resolution		0.01Hz at 45.00 ~ 99.99Hz 0.1Hz at 100.0 ~ 500.0Hz
	accuracy		± 0.1Hz
Current (effective value)	range		0.200 ~ 3.500A 3.00 ~ 35.00A
	resolution		0.001A 0.01A
	accuracy		± (0.5% of reading + 5 counts) , 0.200 ~ 3.500A ± (0.5% of reading + 3 counts) , 3.00 ~ 35.00A
Current (peak value)	range		0.0 ~ 140.0A
	resolution		0.1A
	accuracy		± (1% of reading + 1 counts)
Power (W)	resolution		0.1W 1W
	accuracy		± (0.6% of reading + 5counts) , 0.2 ~ 999.9W ± (0.6% of reading + 2counts) , 1000 ~ 9999W
Apparent power (VA)	resolution		0.1VA 1VA
	accuracy		± (1% of reading + 7 counts) , 0.2 ~ 999.9VA ± (1% of reading + 5 counts) , 1000 ~ 9999VA
Power factor	resolution		0.001
	accuracy		±2% reading + 2 counts
general
Remote output signal			Pass, Fail, Test-in Process, Trigger in, Trigger out, OUT ON/OFF
Trigger Output			Maximum low level output = 0.8V Minimum high level output = 2V Maximum source current = 8mA.
Trigger Input			Maximum low level input voltage = 0.8V Minimum high level input voltage = 2.0V Maximum sink current = 8mA.
Synchronous output signal			Output Signal 10 V, BNC Type
Preset group (number)			10 (0~9 numeric keys)
protect			OCP, OPP, OTP and Alarm
environmental condition	Operating temperature range		0 ~ +40 ℃
	Storage temperature range		-10 ~ +70 ℃
	Operating humidity range		20 ~ 80% RH (no condensation)
	Storage humidity range		80% RH or less (no condensation)
LCD panel display			4.3 inch, 480 (RGB) x 272
Size (mm)		wide	430	430
		tall	312	400
		deep	650	650
weight			90Kg	128Kg
SEQUENCE / SIMULATION FUNCTION
Memory (number)			10 (0~9 numeric keys)
Step order			255 max. (for 1 sequence)
Step time range			0.01 ~ 999.99 S
Step wise execution method			Constant, Keep, Linear Sweep
parameter			Ouptut Range, Frequency, Waveform (sine wave only), On Phase, Off Phase, Term Jump Count (0 ~255), Jump-to, Branch 1, Branch 2, Trigger Output
program control			Start, Stop, Hold, Continue, Branch 1, Branch 2
interface
standard			USB Host, USB CDC, LAN
Optional			GPIB (APS-001) RS232 (APS-007)

Optional APS-003（Output voltage 0~600Vrms
model			APS-7200	APS-7300
Output
rated power			2000VA	3000VA
Maximum current (effective value) * 5		0 ~ 600 Vrms	4.2A	6.3A
Maximum current (peak value)		0 ~ 600 Vrms	Peak value which is four times of the maximum current
Setting up
voltage	range		0 ~ 155Vrms, 0 ~ 310Vrms, 0 ~ 600Vrms, Auto
	resolution		0.01V at 0.00 ~ 99.99Vrms 0.1V at 100.0 ~ 600.0Vrms
	Accuracy * 6		± (0.5% of setting + 2 counts)
measure
Voltage (effective value)	range		0.2 ~ 600.0Vrms
	resolution		0.01V at 0.00 ~ 99.99Vrms 0.1V at 100.0 ~ 600.0Vrms
	accuracy		± (0.5% of reading + 2 counts)

Optional APS-004（Output frequency 45~999.9Hz)
model			APS-7200	APS-7300
Setting up
frequency	range		45.00 ~ 999.9Hz
	resolution		0.01Hz at 45.00 ~ 99.99Hz 0.1Hz at 100.0 ~ 999.9Hz
	accuracy		± 0.02% of Setting
Measurement
frequency	range		45.00Hz ~ 999.9Hz
	resolution		0.01Hz at 45.00 ~ 99.99Hz 0.1Hz at 100.0 ~ 999.9Hz
	accuracy		± 0.1Hz
Total Harmonic Distortion (THD) * 7			≤ 0.5% at 45 ~ 999.9Hz (Resistive Load)

(This specification is applicable after 30 minutes of heating and in an environment between 18 and 28 degrees C.)

Attachment information
CD (manual, program control manual) x 1
quick guide
GTL-123 Test Line
power cord, 8mm2/3C, 3M length, 105℃