Product Features

Excellent high temperature resistance and electrical performance.High viscosity and good thixotropy.Good waterproof and moisture-proof properties, ，excellentAging resistance, corrosion resistance, and weather resistance

Usage process and precautions

1Clean the surface: Clean the surface of the adhered or coated material to remove rust, dust, oil stains, etc.

2Glue application: Use a blade to cut open the pipe opening, cover it with a matching needle, and use a glue gun to squeeze the glue solution onto the cleaned surface that needs to be coated, so that it is evenly distributed. Close and fix the adhesive surface together. For toothpaste aluminum tube packaging, simply unscrew the cap and apply glue by hand. After the operation is completed, if the glue is not used up, it needs to be sealed and stored. When reusing, if there is a slight crust on the sealing area, it can be removed without affecting normal use. During the storage process, there may also be a small amount of solidification at the mouth of the adhesive. After removing it, it can be used normally without affecting the product performance.

3Curing: Place the bonded and sealed components in the air to naturally cure. The curing process is a curing process from the surface to the interior, and within 24 hours (at a temperature of 25 ℃ and a relative humidity of 55%), the adhesive will cure～4mmIf the depth is deep, especially in areas that are not easily exposed to air, the curing time will be prolonged. If the temperature is low, the curing time will also be prolonged. Before entering the next process, it is recommended that the user wait for a sufficient amount of time for the adhesive to meet the required performance requirements or evaluate whether the next operation can be carried out.

Technical Specifications

Note: Both mechanical and electrical performance data are included25℃Relative humidity of 55%, measured after 7 days of curing

Packing Specification:

300ml/Branch and 100g/Branch

Storage and transportation:

1Store in a sealed and dry place away from light and heat, with a storage period of 1 year (25 ℃);

2Can be transported and stored as non hazardous materials.