VIP member
Grinding machine automatic balancing system spindle built-in type
To ensure accurate cutting of the grinding wheel, smooth surface and correct geometric shape of the components, it is necessary to prevent vibration d
Product details
To ensure accurate cutting of the grinding wheel, smooth surface and correct geometric shape of the components, it is necessary to prevent vibration during the grinding process.
Vibration occurs during the grinding process, mainly due to the imbalance of the grinding wheel. The common reason is the unevenness of the grinding wheel itself, that is, the wheel package
Containing a large number of unevenly distributed particles, resulting in an internal imbalance in the grinding wheel. The installation of the grinding wheel is eccentric, the width of the grinding wheel is inconsistent, and the shaft is unbalanced,
Factors such as the suction of coolant into the grinding wheel may also exacerbate the imbalance of the grinding wheel. Taking into account all these factors, even the carefully established initial
The initial equilibrium will not be maintained for a long time. In addition, due to wear and dressing, the rotational dynamics of the grinding wheel are constantly changing.
Due to these reasons, people have long recognized that the dynamic balance of grinding wheels is an important link in the production process.
SBSThe balance system is designed specifically to assist grinder operators in achieving dynamic balance, taking into account the following objectives:
Easy to operate
Easy to install
high-precision
The SBS internal, "spindle internal" or "spindle type" automatic balancer is designed to be installed in the hole inside the grinder spindle. Integrated into the spindle, it can achieve mechanical optimization and save space.
The balance head consists of two electric motors, a gearbox, and calibration weights. Spindle holes ranging from 28mm to 175mm can be used.
Contact and non-contact transmissions with front-end and back-end configurations are options, providing operating speeds of 300-30000 rpm.
The system is a controller using SBS SB-5500 modular controller, which is used for grinding gap touch detection and collision prevention. The sound emission monitoring can be integrated into the flat head to achieve good grinding process control.
Installing SBS internal automatic balancer can eliminate process changes caused by grinding wheels and provide:
*Reduce trembling and wear and tear
*Improve the geometric shape of parts; Roundness, runout, and wear*
* Improve surface smoothness*
*delayLong wheel and dressing table lifespan*
*Extend spindle life*
*Higher cutting speed and productivity*
*Save time*
The SBS Internal, 'In-Spindle' or 'Spindle Type' automatic balancer is designed to be mounted into a bore within the grinding machine spindle. Integrating into the spindle provides mechanical optimisation and space saving.
The Balance Head contains two electric motors, gearboxes & correction weights. Spindle bores ranging from 28mm - 175mm can be utilised. Contact & non-contact transmission in front & rear side configurations are options, providing operating speeds from 300 - 30,000rpm.
The system is controller using the SBS SB-5500 modular controller, and acoustic emission monitoring for grinding gap touch detection and crash prevention can be integrated into the balance head for optimum grinding process control.
Installing an SBS Internal automatic balancer removes variation in the process caused by the grinding wheel, and can provide:
*Reduction in chatter & grinding burn
*Improved part geometry; roundness, run-out & lobing
*Improved surface finish
*Increase in wheel & dresser life
*Extended spindle life
*Higher cutting speeds & productivity
*Time saving
Easy to operate
Easy to install
high-precision
The SBS internal, "spindle internal" or "spindle type" automatic balancer is designed to be installed in the hole inside the grinder spindle. Integrated into the spindle, it can achieve mechanical optimization and save space.
The balance head consists of two electric motors, a gearbox, and calibration weights. Spindle holes ranging from 28mm to 175mm can be used.
Contact and non-contact transmissions with front-end and back-end configurations are options, providing operating speeds of 300-30000 rpm.
The system is a controller using SBS SB-5500 modular controller, which is used for grinding gap touch detection and collision prevention. The sound emission monitoring can be integrated into the flat head to achieve good grinding process control.
Installing SBS internal automatic balancer can eliminate process changes caused by grinding wheels and provide:
*Reduce trembling and wear and tear
*Improve the geometric shape of parts; Roundness, runout, and wear*
* Improve surface smoothness*
*delayLong wheel and dressing table lifespan*
*Extend spindle life*
*Higher cutting speed and productivity*
*Save time*
The SBS Internal, 'In-Spindle' or 'Spindle Type' automatic balancer is designed to be mounted into a bore within the grinding machine spindle. Integrating into the spindle provides mechanical optimisation and space saving.
The Balance Head contains two electric motors, gearboxes & correction weights. Spindle bores ranging from 28mm - 175mm can be utilised. Contact & non-contact transmission in front & rear side configurations are options, providing operating speeds from 300 - 30,000rpm.
The system is controller using the SBS SB-5500 modular controller, and acoustic emission monitoring for grinding gap touch detection and crash prevention can be integrated into the balance head for optimum grinding process control.
Installing an SBS Internal automatic balancer removes variation in the process caused by the grinding wheel, and can provide:
*Reduction in chatter & grinding burn
*Improved part geometry; roundness, run-out & lobing
*Improved surface finish
*Increase in wheel & dresser life
*Extended spindle life
*Higher cutting speeds & productivity
*Time saving
rnttt
rntt
After sales service hotline:
Brand official website: http://www.hofusen.cn
Service commitment:
Hongfuxin Precision Technology (Beijing) Co., LtdLimited companies provide not only products but also services to users.HongfuxinWe value reputation, technology, and service. We deeply understand that customers are the foundation of a company's survival, and service is the source of its development. We have always provided one-stop pre-sales, in sales, and after-sales services based on the characteristics and actual requirements of our customers, including recommended solutions, process design, equipment configuration, equipment installation and adjustment, personnel training, long-term maintenance, and upgrades. If you have measurement difficulties but have not yet used our products or have purchased our products, but still have opinions or suggestions about our services, please download the following pre-sales customer survey and after-sales customer feedback form, fill them out and return them to us. We will provide you with reasonable solutions and adopt your valuable opinions and suggestions, and provide you with high-quality products and services! Thank you for your support and welcome to enjoy our services!
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-