Product Introduction

The hardware and driver interfaces compatible with GigE, as well as the compact 35mm * 35mm casing, are perfectly integrated into existing low-cost systems. This camera series boasts excellent imaging quality: low noise, selectable with 4 Aptina CMOS, 10 Sony and 3 Truesense Imaging combined with CCD sensors. The trigger delay of 2 µ s achieves optimal synchronization between the camera and strobe lighting. These camera designs utilize industry standards (C-mount lens adapters, Hirose plug, RJ45 plug is suitable for CAT5e or CAT6 control lines, which can significantly reduce the cost of machine vision systems.

■ Trigger delay of only~2 µ s, jitter error less than 0.5 µ s

■ Power over Ethernet (PoE)

■ Partial scanning is possible to extract regions of interest and characteristic features

Horizontal and vertical pixel merging (binning)

■ Minimal thermal noise, low power consumption

■ Superior seismic resistance

■ Ethernet update software

■ Accurate calibration of image sensors

■ Hardware and software compatible with GigE Vision and GenCam

■ Industrial standard connectors: Hirose 12 pin RJ45 with anti drop screws

Ethernet cable transmission distance up to 100m

■ Plug and play, connect your camera to Ethernet

■ Aluminum alloy shell

■ Standard C-Mount lens adapter

Camera performance

■ Multiple high-end CCD/CMOS sensors are available for selection: Aptina, Sony, and Truesense Imaging

■ Tight packaging 35x35x48 mm

Programmable exposure time from 10 µ s to 10 s