The performance characteristics of the 12Z type non-magnetic metal conductivity meter from Germany's Yabai eddy current conductivity meter are as follows:

12ZUsed to measure the conductivity of non-magnetic metals

main features:

lHandheld design

lThe calibration standard is an internationally traceable standard(Boeing)

ldirect%IACSreading

lNon contact measurement with lift off compensation

lautomatic temperature compensation

l 4×AABattery, providing approximately100Hour by hour operation

leasy to operate

Technical parameters of the 12Z type non-magnetic metal conductivity meter from Germany's Yabai eddy current conductivity meter:

Measurement range:1.5 - 110% IACS

Min interface: diameter10mm(standard)perhaps7.5mm(optional)

resolution: 0.1% IACS (65 - 110% IACS)

0.05% IACS (30 - 65% IACS)

0.02% IACS (10 - 30% IACS)

0.01% IACS (1.5 -10% IACS)

Measurement accuracy at ambient temperature: 10 - 30℃，±1%；0 - 40℃, in2%

Withdrawal compensation:up to200μm

frequency: 60 khz

power supply: 4×AAalkaline battery

operate temperature: 0 - 40℃

Advantages of the 12Z type non-magnetic metal conductivity meter from Germany's Yabai eddy current conductivity meter:

1Turn on the deviceimmediatelyuse

Like inputting parameters such as thermal drift, other devices require preheating and2Point or3Point calibration.

2.Single point calibration, automatic temperature compensation

In one operation, the instrument will display that it has been compensated for20The conductivity at ℃ is based on the standard of conductivity approaching the target material. This simplifies and accelerates the measurement process. This method also ensures accurate readings regardless of who the operator is.

3.Synchronized lift off readings

The model shows approximateμmThe lift off reading of the unit can be used to estimate the thickness of the coating.

4.Easy to use

Among all the instruments on the market,12ZIt is easy to use and less prone to operator errors.12ZThe training only takes a few minutes, saving employees' time. Since the instrument is calibrated with its own sensors, it is impossible for errors to occur due to the complex installation process of the new probe. If a probe needs to be installed, before returning to the customerZAPPITECDuring installation, we will ensure that the instrument readings are accurate in metric blue.

5Extremely long battery life

12ZUsing ordinaryAAAlkaline batteries are easy to replace. This allows the instrument to operate without interruption, without the need for charging, and maintain maneuverability without the need for a power outlet.

lMeasurement of Electrical Conductivity of Non ferromagnetic Metals

lComposition, Heat Treatment, Evaluation, and Sorting of Non Destructive Alloys

lHeat treatment evaluation of copper chromium, copper zirconium and aluminum alloys

lThermal damage determination of aluminum alloys for aerospace industry

lRaw material purity(Copper, silver, gold, aluminum)Quality control. Optional7.5mmsensor measurement8mmCopper rod cross-section

lApproximate analysis of some binary alloys

Measurement of Thermal Conductivity of Metals