1、 Main features

1. Can simultaneously detect oxygen in natural gasnitrogenThe content of various components such as carbon dioxide, methane, ethane, propane, isobutane, n-butane, isopentane, n-pentane, C6+, etc. Each component can be separated, with a detection range of 0.01% to 100%.

2. Built in hydrogen generator and industrial computer. The electronic circuit has high integration, good reliability, easy and understandable operation, stable and reliable instrument quality, and can operate continuously for a long time.

3. Calculate based on the content of each componentheating value of natural gasWhite number, density, gasification rate, etc.

4. The instrument can be used in the laboratory, Z-line, or as a portable or vehicle mounted device.

2、 Analysis instrument configuration

1. Gas chromatography: Thermal conductivity detector (TCD), built-in hydrogen generator, computer;

2. Calorific Value Edition Gas Workstation Kit

3. Gas sampler (optional Z-line automatic sampling system)

4. Chromatography column: 1 set of natural gas chromatography column

5. Sampling bag 2L

6. Common tools

This configuration meets G's standards

GB/T -13610-2014 Composition Analysis of Natural Gas - Gas Chromatography Method

GB17820-2018 Natural Gas

GB/T11062-2014 Calculation of natural gas calorific value, density, and relative density

GB/T22723-2008 Determination of Natural Gas Energy

3、 Equipment Display Diagram

4、 Instrument parameters

1. Temperature control range: The temperature can be adjusted from room temperature to 300 ℃;

2. Temperature control: better than ± 0.1 ℃

3. Stability of carrier gas flow rate: ≤ 1%

4. Thermal conductivity detector: Sensitivity S ≥ 4000mv. ml/mg; Noise ≤ 20UV; Linear range ≥ 104

5. Instrument size: 400 * 380 * 400mm.

5、 After sales service commitment　

1. The instrument is covered by a 12-month warranty from the date of self installation, debugging, and acceptance, and requires maintenance.

2. In case of instrument malfunction, timely response or telephone guidance for maintenance can be provided, and professional technical service engineers can be dispatched to the site within 48 hours to troubleshoot.

3. If there is a software upgrade for the same series of instruments, our company will provide free upgrade services for users.

4. Installation and Debugging: After the user has prepared all installation conditions and requested installation, our company will send professional engineers to install and debug the instrument for free, and provide centralized on-site training on usage, maintenance, and upkeep for the user's personnel, until the user can operate the instrument proficiently and independently.

5. The auxiliary materials, spare parts, signal lines, power lines, etc. required for the installation and commissioning of the equipment are provided free of charge by our company.