Features of automatic film breaking and winding machine:

This machine adopts intelligent control technology and can perform various packaging operations for different work objects.

(1) Multiple function program settings: fully automatic packaging program, manual work program, adjustable lifting pause, zeroing position (can stop program execution, equivalent to the general control STOP stop button) and other function settings.

(2) Using digital methods to set the number of lower packaging circles, upper packaging circles, and multi-layer packaging for packaged objects. The digital display shows the set values and actual packaging circle values, which are intuitive and clear.

(3) Complete self-protection function design, equipped with manual emergency stop and electronic control self stop device, to prevent accidental damage to the components.

(4) The pre stretch packaging technology of wrapping film not only provides users with affordable packaging costs, but also elevates the appearance of the packaged items.

(5) Slow start and slow stop of the turntable positioning can overcome the concern of upper packaging objects falling off due to too fast starting speed, making it convenient for operators to load and unload workpieces. It can also make the machine easy to match with the packaging assembly line.

(6) Automatic reset: When the machine is in normal use, it will automatically reset to standby mode after the entire packaging process is completed. However, if the machine's automatic reset is not in place due to improper use or mechanical reasons, the machine reset situation can be checked and the machine can enter the reset operation program.

(7) Adopting dual chain guide rails for safe operation.

(8) The stretching ratio reaches 300%, saving materials.

(9) The machine is equipped with error proof limit switches both inside and outside, which are safe and reliable

Main performance of winding machine:

Control system:

PLC control, winding layers and times can be set;

Photoelectric switch, automatically sensing the height of goods;

Reinforced winding function, which can provide special protection for a certain part;

Time setting function for exceeding the limit.

Advantages of human-machine interface:

Humanized intelligent parameter setting;

Directly set the interface display screen;

The operation is simpler and more convenient;

Realize human-machine dialogue, with the display screen showing the device's operation status at any time;

Adopting integrated communication methods, frequency conversion speed regulation is more prominent;

Troubleshooting is more convenient and intuitive;

Rotary drive:

Rotary table variable frequency speed regulation adjustable from 0 to 15 rpm;

The turntable is driven by a chain drive, with precise positioning;

Automatic reset of the turntable;

Membrane rack system:

Open door film holder, equipped with variable frequency speed regulation, adjusts the tension of the film, and the pre stretching can reach 250%

The lifting and lowering speed of the membrane frame can be adjusted by frequency conversion;

The number of wraps at the top and bottom are separately controlled;

The membrane system follow-up mechanism can be pulled with just one pull;

Column mechanism:

Double chain structure, stable and reliable

Automatic film breaking system

Pneumatic control,

Automatic film installation, film breakage, and film brushing

Performance of top packaging machine:

There are two types of working membranes available for the equipment: wrapping membrane and wrapping membrane covering. Equipped with automatic film breaking mechanism and top covering mechanism

The machine automatically applies, breaks and mucous membranes, and is equipped with a remote control device to achieve remote control. The operator can operate automatically on the forklift or remotely control it.

Adopting PLC programmable controller and touch screen control system, it is easy to operate and reliable in performance.

Digital human-machine interface, input corresponding work instructions according to the wrapping needs. The number of winding layers, top turns, bottom turns, and over top time can be set.

The pre stretch film holder saves stretch film by pre stretching, with a pre stretch of up to 250% and a pre stretch tension digital knob. The tension of the film can be adjusted freely according to packaging needs and the quality of the stretch film.

The photoelectric switch automatically senses the height of the goods, and the turntable automatically resets.

Open pull film installation door, easy and fast to replace stretch film.

Equipment is equipped with various safety protection measures such as safety protection frames, film breaker protective covers, and film frame protective plates to fully protect the safety of operators and equipment.

Top lifting speed: 0-5 meters/minute

Top covering and film pulling speed: 12m m/min

Covering film width: 1900mm (length adjustable)

Top covering and film breaking method: Quick cutting with a cutting knife

Top covering film type: PE film, thickness 50-75, width 1600-1900mm, net weight within 120KG

PLC： Mitsubishi

Touch screen: Taiwan Weilun

Inverter: Delixi

Rod free film cutting cylinder: Festo

Swing arm, clamping cylinder: Yadeke

Travel switch: Schneider

Communication contactor: Schneider

Relay: Schneider

Gearbox: Liming/Taiwan

Electromagnetic valve: Xin Gong/Taiwan

Proximity switch: Yangming

Start green button: Izumi/Japan

Product Name/Specification	Fully automatic laminating tray winding machine
Wrapping specifications	(500-1200)×（500-1200）mm（L×W）(max)
Turntable diameter	φ1800mm
Packaging height	（500~2100）mm
Turntable height	136mm
Rotating platform load-bearing capacity	1800kg （max）
control system	PLC control, adjustable winding layers and times, automatic reset of turntable, automatic sensing of cargo height
The corresponding number of layers for the wrapping film can be set separately	For example, (upper/middle/lower, corresponding to 2/25 layers)
The film release force can be set	Numerical range 1-15KG
Rotating scale value	Numerical range: 0-50HZ
Overlap Scale Value	Numerical range (0% -90%)
Whole machine weight	800kg
Whole machine power supply voltage	1.5kw single-phase 220V
rotary speed	0~15 revolutions per minute, adjustable speed through frequency conversion
Film breaking method	Instantly heating and melting
Membrane rack lifting speed	3m/min
power supply	Three phase 380VAC, 50/60Hz, 20A, 3kw
Machine size	3160 x 2825 x 3100mm
machine weight	900kg
Taiwan brand of membrane frame motor	Name: 0.4kw
Pre pulled motor Taiwan brand	Name: 0.4kw
photoreceptor	Omron
PLC	Mitsubishi
Touch Screen	Taiwan Weilun. The number of circles at the top and bottom, as well as the number of round trips, can be set. When the membrane frame is set to an odd number, it will automatically descend to the designated position after staying at the top for 20 seconds; When set to an even number, the membrane frame can be set to top up and down