Fully automatic greenhouse roller shutter machine

　　Product features of greenhouse roller shutter machine:
　　1.Greenhouse roller shutter machineSuitable for winter warm greenhouses with a length of about 100 meters, the product comes in both self-propelled and wall top fixed models. Users can choose different models according to their specific needs.
2. The components of the greenhouse roller shutter machine are made of the highest quality materials, designed reasonably according to the actual roller shutter effect, with few malfunctions and a longer service life.
3. It takes 5-7 minutes to roll once, and it is stable and smooth.
4. This greenhouse roller shutter has a unique brake and power design, making it safer and more reliable.
5. The greenhouse roller shutter machine can be operated both electrically and manually, and can be parked freely during the rolling process.
6. This greenhouse roller shutter machine is flexible and convenient, fully considering the simpler installation, disassembly, and maintenance operations.

　　Installation steps of greenhouse roller shutter machine:
1. Pre weld various connecting joints and flanges onto the pipe; Determine the strength and length of the crossbars based on the length of the shed (generally, sheds below 60 meters use 2-inch high-frequency welded pipes with a wall thickness of 3.5; sheds above 60 meters use 2-inch pipes at both ends, except for 30 meters at each end, and 2.5-inch diameter high-frequency welded pipes on both sides of the main unit); Welding roller shaft teeth; If welding double pipes is required for double pipe uprights.
2. Connect the host to the motor.
3. Lower the grass straw on the shed from the middle to both sides, aligning the bottom, and lay a non elastic rope under each straw.
4. Dig a pit and bury ground stakes in the center of the shed, 1.5-2 meters away from the shed.
5. Connect the support rod with a flexible knot and a pivot, stand it up, and connect it to the ground pile.
6. Connect the vertical pole to the host, and lay the horizontal pole for backup connection.
7. Connect the machine rod or scroll from the middle to both sides.
8. Fix the rope under the canopy onto the shaft teeth.
9. Connect the reverse switch and power supply.
10. Test the machine and place some soft material on the slow rolling area to adjust the rolling speed until it rolls in a straight line.

　　Greenhouse roller shutter machineusage method:
The initial installation of the rolling shutter machine is completed by professional installers, making it very convenient for users to use.
When rolling up the roller blind from bottom to top, turn the switch to the "smooth" position. When the roller blind reaches the predetermined position, turn the switch back to the "off" position.
When placing the curtain from top to bottom, turn the switch to the "inverted" position. When placing the curtain to the predetermined position, turn the switch back to the "off" position.
In case of power outage, the hand crank can be inserted into the hand crank socket and manually shaken. Shake the roller blind clockwise to lift it up, and counterclockwise to lower it down.

　　Main features of greenhouse roller shutter machine:
The greenhouse roller shutter machine is an electromagnetic brake roller shutter machine, which fills the gap in the roller shutter machine market and has obtained a national patent. It has achieved noise free, safer, and more flexible and convenient operation. The unique brake buffer extends the service life of the rolling shutter machine.
The unique separation device can easily roll and place straw curtains in any situation. Unique overload protection device, very safe to use. The new generation of fixed roller shutter machines is designed with dual brakes, eliminating brake hazards. The innovative design of the fast and slow speed combination makes it easy to use and adjust the speed freely, enabling the fixed roller shutter machine to truly achieve the goal of safety and practicality.
　　Precautions for agricultural greenhouse roller shutter machine:
1. After each shutdown of the greenhouse roller shutter machine, cut off the main power supply outside the greenhouse in emergency situations.
Before using the greenhouse roller shutter machine for the first time, inject 3-4 kilograms of engine oil into the machine body, and replace it once a year thereafter.
After installing the rolling shutter machine, a thin film must be attached to the straw cover.
4. During the installation or use of the fully automatic greenhouse rolling shutter machine, it is necessary to regularly check whether the screws at the main unit and various connection points are loose, whether there are any problems such as breakage or open welding at the welding points.
5. Users are not allowed to disassemble the casing, nameplate, clutch system, etc. of the greenhouse roller shutter machine on their own, otherwise no warranty or replacement will be provided.
Before and during use, the clutch system of the greenhouse roller shutter machine must be oiled.
7. After the rolling shutter machine is started, an adult must be present next to the power switch. No one is allowed in front of the shed or near the vertical pole or rolling straw.
8. Another knife switch must be connected near the control switch.
When it is lowered to the bottom or rolled up to 30 centimeters from the top of the shed, the machine must be stopped.
Before using the greenhouse roller shutter machine for the first time, the operator must undergo training.
11. When purchasing and installing on their own, users need to test the length of the shed and the weight of the straw, select appropriate materials, and use good welding techniques.
If there is a slight deviation during the rolling process, it is a normal phenomenon. It can be adjusted every two months or so.