Product Introduction

Fuji SMT machineXPF-WMachine parameters:

Object circuit board size(L×W)：MAX686mm×508mmthickness0.4～6.5mm/MIN50mm×50mm

Circuit board loading time:3.5sec

Machine size:L:1,500mmW:1,762.5mmH:1,422.5mm(Handling height):900mmExcept for signal towers

Machine weight:

Local machine:1,860kg

MFU-40:about240kg(Full load)W8When using a feeder

BTU-AII:about120kg，BTU-B:about15kg，MTU-AII:about615kg(Full load tray/feeder inch)

Number of suction nozzles:12(Rotating automatic head replacement)

Automatic Head Replacement Collection:3

Object components:0402(01005)～20×20mmheightMAX3.0mm

Installation rhythm:0.145sec/a24,800cph

Mounting accuracy: small chip components, etc. ±0.050mmcpc≧1.00~±0.066mmcpk≧1.33

QFPComponent ±0.040mmcpc≧1.00~±0.053mmcpk≧1.33

Number of suction nozzles:1(Single nozzle)

Automatic Head Replacement Collection:8When using the tray, the height of the collection and measurement tray will automatically change the head1A)

Object components:1005(0402)～45×150（68×68）mmheightMAX25.4mm

Installation rhythm:0.418sec/a8,600cph

Mounting accuracy: small chip components, etc. ±0.040mmcpc≧1.00~±0.053mmcpk≧1.33

QFPComponent ±0.030mmcpc≧1.00~±0.040mmcpc≧1.33

Number of suction nozzles:4（M4Automatic Head Replacement

Automatic Head Replacement Collection:1

Object components:4Suck, suck:3×3～14×14mm，2Suck, suck:14×14～22×26mmheightMAX6.5mm

Installation rhythm:4Suck, suck:0.351sec/a10,250cph~2Suck, suck:0.462sec/a7,800cph

Mounting accuracy:QFPComponent ±0.040mmcpc≧1.00~±0.053mmcpk≧1.33

Component packaging:

Material components(JISSpecificationsJEITATube components, tray components

Other options:

Tube mounted feeder, wide-angle positioning camera, immersion flux unit, roll mounting table (built-in type), pin coplanarity inspection, special suction nozzle&mechanical clampFujitrax

Fuji SMT machineXPF-WProduct Features:

1Can automatically replace the mounting head during production

Implemented the world's first automatic replacement work head.

Because the high-speed working head can be automatically replaced with a multifunctional working head during machine operation, all components can always be mounted with the optimal working head.

It can also automatically replace the working head for applying adhesive, using only1A machine can apply adhesive and mount components.

2No need to worry about balancing between high-speed and multifunctional machines

By implementing automatic replacement of the working head, the boundary between high-speed machines and multifunctional machines has been eliminated(borderless).

For all types of circuit boards, because the balance between machines is always in the optimal state, the machine's capabilities can be maximized.

3TheXPF-WCorresponding to the maximum circuit board size686mm×508mm

Corresponding models of large circuit boardsXPF-WCan correspond to the maximum686mm×508mmThe size of the circuit board can also correspond to the weight6kgThe circuit board.

Shenzhen Topco Industrial Co., LtdFocused on providing the following services for electronic manufacturersSMT equipment:

MPM Printing MachineTheKoh Young SPI、SMT machine rental

Siemens SMT machineTheFUJIFuji SMT machine、Panasonic SMT machine

American LandAOI、Vitronics Soltec reflow soldering、Non standard automation equipment

Wait for the whole thingSMT production line equipment, andSMT spare parts、SMT supporting materials、Services and Solutions.