1: The fuel hot air blower is a key product of our factory. The materials used in the fuel tank filling port and fuel gauge display are original materials that meet international standards. Even after increasing use, the machine will not wear out, and the display will show obvious signs, making it very safe to use

2: The control switches on the machine are surrounded by plastic shells for electrical safety and protection against wear and tear caused by frequent long-term operation. This will greatly ensure the performance of the switch controller. Otherwise, if there is damage, it will have a significant impact and cause significant damage to the overall use of the machine

3: The air outlet of the fuel powered hot air blower is the main outlet for thermal energy, and the temperature during use can be very high. When using it, be sure not to touch it with bare hands to avoid burns caused by the heat of the machine. If it is very hot, do not sprinkle water on the machine. Although the material is explosion-proof, this operation can also cause damage to the service life of the machine

Another key point to note is that children must stay away, and the air outlet should not face the human body or poultry for a long time to avoid unexpected situations.

When the machine is turned off without stopping use, be sure to touch the machine itself because it will be relatively hot after long-term operation. It is necessary to first set it aside for ventilation and natural cooling, and then move it within a range that people can bear.

4: The machine is a unit consisting of an electric motor, a ventilation fan, and a radiator. The first thing to ensure in frequently used scenarios is smooth ventilation and the ability to achieve air circulation. And the air must not contain flammable dust or gases. Generally, it is mainly used in large-scale animal hatching and breeding, as well as in large workshops and factories. Drying of damp wood, heating for civilian households, etc.

Its working principle is to heat the air through a heater and then the fan outputs heat again. The exhaust pipe and the heat medium circulation pipe are welded together as a whole, consisting of spiral finned tubes. At the same time, the working pressure of the heater is below 0.8 MPa

The main performance advantages are as follows

1: The overall body is small and has a handle for flexible movement, with multiple models to choose from

2: Four gear operation is convenient, including power on/off, single blowing, and heating with half power/full power blowing for warm air

3: Set temperature control by yourself

4: Equipped with an auxiliary fan for heating, capable of producing strong winds with high horsepower output

5: Overall safety and peace of mind, automatic power-off when the temperature exceeds the standard, and protection against machine overheating

5: When doing homework, it does not consume oxygen in the application scenario, is odorless, does not produce moisture, has low noise, does not produce smoke, has good thermal effect, and transfers heat quickly.

6: The wires used are not rubber wires and have extremely strong corrosion resistance. The heating element (key part, core component) adopts 304 stainless steel electric heating tube (currently higher grade stainless steel), and machines above 6KW (including 6KW) use industrial plugs (please confirm if you have three power sources)

7. The fuel air blower produced by our factory can be used directly without any additional spare parts for operation. After purchase, place it in a location that requires heating and plug it in for direct use