Fracturing proppant volumetric density tester

FT-109AFracturing proppant volume density

testerOneReference standardsstandard

：

Refer to API RP60, Q/SY 124-2007 and SY/T 5108-2006 fracturing proppant performance indicators and testing methods, as well as QSY standards

125-2007 Preparation of Performance Table and Evaluation Testing Method for Fracturing ProppantsVolume density: The mass of proppant per unit stacking volume is called proppant volume density; The mass of ceramic particles per unit stacking volume is called the bulk density of ceramic particles, which is the average density of the ceramic particles themselves, open pores, and closed pores. The unit is g/mL

2、 Parameter requirements:

Technical Parameters

The total height of the instrument table from the top of the funnel to the bottom of the barrel shaped container is 304.8mm; The distance from the falling point of the proppant to the instrument table is 215.9mm;

2. The funnel height is 76.2mm; The height of the funnel mouth is 12.7mm; The barrel shaped container is 76.2mm high; The width of the instrument table is 30.48mm.

Rubber blocking ball diameter=30.48mm;

Stainless steel bracket with a diameter of 4.8mm; Barrel shaped volume with a diameter of 38.1mm;Outer diameter of funnel top=139.7mm; Inner diameter of funnel top=114.3mm;Kind reminder: We also have related supporting products, please keep in touch with us