VIP member
Flange type liquid level transmitter
The key raw materials, components, and parts of the ZP-TL1151/3051LT flange type liquid level transmitter are all imported or joint venture sourced. T
Product details
Flange type liquid level transmitterSimulation Characteristics
● High precision
● Range and zero point can be continuously adjusted externally
● Good stability performance
Positive migration can reach 500%, negative migration can reach 600%
● Two line system
Adjustable damping and overvoltage resistance
Solid state sensor design
No mechanical movable parts, low maintenance volume
● Lightweight (2.4kg)
● Unified structure and strong interchangeability across the entire series
● Miniaturization (166mm total height)
The membrane material that comes into contact with the medium is optional
● Unilateral overpressure resistance
Low pressure cast aluminum alloy shell
Flange type liquid level transmitterIntelligent features:
Super measurement performance, used for pressure, differential pressure, liquid level, and flow measurement
● Digital accuracy:+ （-）0.05%
Simulation accuracy:+ （-）0.75%+（-）0.1%F.S
● Full performance:+ （-）0.25F.S
Stability: 0.25% for 60 months
Range ratio: 100:1
Measurement rate: 0.2S
● Miniature (2.4kg) all stainless steel flange, easy to install
● Process connection is compatible with other products to achieve optimal measurement
The world's * sensor (technology) using H-alloy sheath has achieved excellent cold and hot stability
Intelligent transmitter using 16 bit computer
Standard 4-20mA, with digital signal based on TLRT protocol, remote control
● Support upgrades to fieldbus and field control based technologies.
measuring range
Differential pressure: 0~1.3-1MPa
Flange type liquid level transmitterSelection method
| ZP1151/3351LT | Flange type liquid level transmitter (maximum working pressure 2.5MPa) | |||||||||||
| 4 | 0-4～40KPa | |||||||||||
| 5 | 0-40～250KPa | |||||||||||
| 6 | 0-0.16～1.0MPa | |||||||||||
| code | output | |||||||||||
| E | Non intelligent type (4-20mA output) | |||||||||||
| S | Intelligent (HART protocol) | |||||||||||
| code | Nominal diameter size (mm) | Insertion tube length (mm) | High pressure side diaphragm material | |||||||||
| A0 | 80 | flat | 316LSST | |||||||||
| A2 | 80 | 50 | 316LSST | |||||||||
| A4 | 80 | 100 | 316LSST | |||||||||
| A6 | 80 | 150 | 316LSST | |||||||||
| B0 | 100 | flat | 316LSST | |||||||||
| B2 | 100 | 50 | 316LSST | |||||||||
| B4 | 100 | 100 | 316LSST | |||||||||
| B6 | 100 | 150 | 316LSST | |||||||||
| C0 | 80 | flat | Ha Shi C-276 | |||||||||
| C2 | 80 | 50 | Ha Shi C-276 | |||||||||
| C4 | 80 | 100 | Ha Shi C-276 | |||||||||
| C6 | 80 | 150 | Ha Shi C-276 | |||||||||
| D0 | 100 | flat | Ha Shi C-276 | |||||||||
| D2 | 100 | 50 | Ha Shi C-276 | |||||||||
| D4 | 100 | 100 | Ha Shi C-276 | |||||||||
| D6 | 100 | 150 | Ha Shi C-276 | |||||||||
| E0 | 80 | flat | tantalum | |||||||||
| F0 | 100 | flat | tantalum | |||||||||
| code | mounting flange | |||||||||||
| A | 3 "150lb | Galvanized carbon steel | ||||||||||
| B | 4 "150lb | |||||||||||
| C | 3 "300lb | |||||||||||
| D | 4 "300lb | |||||||||||
| code | Structural materials | |||||||||||
| Flanges and fittings | Exhaust/Drain Valve | Isolation Diaphragm | Fill with liquid | |||||||||
| 22 | 316 stainless steel | 316 stainless steel | 316 stainless steel | silicone oil | ||||||||
| 23 | 316 stainless steel | 316 stainless steel | Hastelloy C | |||||||||
| 24 | 316 stainless steel | 316 stainless steel | Monel | |||||||||
| 25 | 316 stainless steel | 316 stainless steel | tantalum | |||||||||
| 33 | Hastelloy C | Hastelloy C | Hastelloy C | |||||||||
| 35 | Hastelloy C | Hastelloy C | tantalum | |||||||||
| code | option | |||||||||||
| M1 | 0-100% linear indicator table | |||||||||||
| M2 | LED digital display table | |||||||||||
| M3 | LCD display table | |||||||||||
| C0 | 1/2-14NPT taper pipe internal thread joint | |||||||||||
| C1 | 1/2-14NPT pressure joint rear welded pressure pipe with a diameter of 14 | |||||||||||
| C2 | T-shaped threaded joint M20 × 1.5 | |||||||||||
| d | Explosion proof type d Ⅱ BT4 | |||||||||||
| i | Intrinsic safety type ia Ⅱ CT6 | |||||||||||
flange mounting
The installation flange standard has 3 "and 4" specifications according to ANSI, and the flange grades are divided into 150LB (2.5MPa) and 300LB (5.0MPa). If the user adopts the GB9116-88 standard, please specify DN=80, 100, PN=2MPa. The materials for the liquid receiving membrane include 316L, Hastelloy C-276, Monel, tantalum, etc. If not specified by the user, 3 "150LB flange and liquid receiving membrane material 31 shall be supplied.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-