VIP member
FWR series flow monitor (rotor)
Features: Machine measurement liquid display, the rotation of the motor rotor is proportional to the flow rate, and the speed of the rotor is clearly
Product details
characteristic
The liquid display for machine measurement shows that the rotation of the motor rotor is proportional to the flow rate, and the speed of the rotor is clearly visible. The flow rate can be measured by the female threaded joints G1/4~G1 1/2 copper and stainless steel. Copper alloy or stainless steel 316L structure.
The mechanical structure on the inner surface of the glass can be cleaned
360 degree no dead zone visibility
● Pressure resistance: 16 bar
● Medium temperature: Max 100 ℃
● Average pressure loss: 0.25 bar at Qmax
Technical Parameter
| G | Model | maximum flow | Rotating minimum flow rate L/min | L | SW | H | weight | |||||||||||||||||
| mm | L/min (water) | water | 40 mm²/s | 41-150 mm²/s | mm | mm | mm | kg | ||||||||||||||||
| brass | G1/4 | FWR-008GM | 4 | 0.4 | 2.0 | 3.0 | 72 | 36 | 9 | 0.35 | ||||||||||||||
| G3/8 | FWR-010GM | 8 | 0.6 | 2.0 | 3.0 | 72 | 36 | 9 | 0.35 | |||||||||||||||
| G1/2 | FWR-015GM | 12 | 1.0 | 3.0 | 3.5 | 86 | 46 | 13 | 0.65 | |||||||||||||||
| G3/4 | FWR-020GM | 25 | 1.0 | 3.0 | 3.5 | 94 | 46 | 16 | 0.65 | |||||||||||||||
| G1 | FWR-025GM | 40 | 1.6 | 3.0 | 3.5 | 104 | 46 | 16 | 0.65 | |||||||||||||||
| G1 1/4 | FWR-032GM | 90 | 8.0 | 4.0 | 5.0 | 120 | 65 | 19 | 1.6 | |||||||||||||||
| G1 1/2 | FWR-040GM | 100 | 8.0 | 5.0 | 5.0 | 130 | 65 | 20 | 1.7 | |||||||||||||||
| stainless steel | G1/4 | FWR-008GK | 4 | 0.4 | 2.0 | 3.0 | 72 | 72 | 72 | 0.35 | ||||||||||||||
| G3/8 | FWR-010GK | 8 | 0.6 | 2.0 | 3.0 | 72 | 72 | 72 | 0.35 | |||||||||||||||
| G1/2 | FWR-015GK | 12 | 1.0 | 3.0 | 3.5 | 86 | 86 | 86 | 0.65 | |||||||||||||||
| G3/4 | FWR-020GK | 25 | 1.0 | 3.0 | 3.5 | 94 | 94 | 94 | 0.65 | |||||||||||||||
| G1 | FWR-025GK | 40 | 1.6 | 3.0 | 3.5 | 104 | 104 | 104 | 0.65 | |||||||||||||||
| G1 1/4 | FWR-032GK | 90 | 8.0 | 4.0 | 5.0 | 120 | 120 | 120 | 1.6 | |||||||||||||||
| G1 1/2 | FWR-040GK | 100 | 8.0 | 5.0 | 5.0 | 130 | 130 | 130 | 1.7 | |||||||||||||||
material
| FWR-…GM | FWR-…GK | |||||||
| casing | Bronze MS58 | Stainless steel 1.4305 | ||||||
| Motor Rotor | POM (red) | POM (red) | ||||||
| Window tube | glass | glass | ||||||
| cleaning device | Polyene materials | Polyene materials | ||||||
| seal | NBR | NBR |
dimension
Model Selection Table
| FWR- | Flow indicator | |||||||
| Applicable pipe diameter | ||||||||
| Nominal caliber DN8~G1/4 | ||||||||
| Nominal caliber DN10~G3/8 | ||||||||
| Nominal caliber DN15~G1/2 | ||||||||
| Nominal caliber DN20~G3/4 | ||||||||
| Nominal caliber DN25~G1 | ||||||||
| Nominal caliber DN32~G1 1/4 | ||||||||
| Nominal caliber DN40~G1 1/2 | ||||||||
| Connection method | ||||||||
| Internal thread interface | ||||||||
| material selection | ||||||||
| Bronze MS58 | ||||||||
| Stainless steel 1.4435 (316L) | ||||||||
| The above selection table does not include selection codes. If you need selection codes, please contact us or fill in your information | ||||||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-