VIP member
FLECK2850 Fulaik fully automatic water softener 001 * 7 Yang resin and fiberglass winding tank for spot sales
FLECK2850 Fulike fully automatic water softener 001 * 7 cation resin and fiberglass winding tank, Fulike fully automatic water softener adopts fixed b
Product details
General requirements for installation:
1. The inlet pressure should be between 0.2-0.5MPa. When the water source pressure cannot meet the requirements, a booster pump can be installed to increase the inlet pressure. If the pressure is too high, a pressure reducing valve should be installed to control the inlet pressure.
2. The inlet water temperature should be between 5-45 ℃, and the power supply should be AC 200V/50Hz.
3. The water softener should be installed on a sturdy platform with unobstructed drainage nearby and sufficient space for operation and maintenance.
4. The working environment temperature should be between 5-50 ℃, and the relative humidity should be ≤ 95% (at 5 ℃).
1. The inlet pressure should be between 0.2-0.5MPa. When the water source pressure cannot meet the requirements, a booster pump can be installed to increase the inlet pressure. If the pressure is too high, a pressure reducing valve should be installed to control the inlet pressure.
2. The inlet water temperature should be between 5-45 ℃, and the power supply should be AC 200V/50Hz.
3. The water softener should be installed on a sturdy platform with unobstructed drainage nearby and sufficient space for operation and maintenance.
4. The working environment temperature should be between 5-50 ℃, and the relative humidity should be ≤ 95% (at 5 ℃).
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-