Main purpose:

Widely used in aluminum materialsStainless steel、Single side grinding of various materials.

Principle of high-precision grinding machine equipment:

1.This grinding machine is a precision grinding equipment. The material to be ground and polished is placed on a grinding disc. The grinding disc rotates counterclockwise, and the correction wheel drives the workpiece to rotate on its own. The workpiece is pressurized by gravity, and the workpiece and the grinding disc rotate and rub against each other to achieve the purpose of grinding and polishing.

2.The disc repair machine adopts hydraulic suspension guide railReciprocating motion back and forthThe diamond trimming knife precisely trims the grinding disc to achieve precise flatness.

Characteristics of high-precision grinding machine:

1、Variable frequency control achieves soft start, soft stop, low impact force, and reduces workpiece damage.

2The timing function is used to control the time. When processing products, the time and speed can be pre-set on the panel. When the working time jumps to the set time, the machine automatically stops working, which can better control the product size.

3. The workpiece of the grinding machine is pressurized by the self weight of the weight block. After polishing, the surface of the workpiece has high brightness, no scratches, scratches, no material lines, no pits, no collapsed edges, and high flatness. After polishing, the surface roughness of the workpiece can reach Ra0.002;

4、 Adopting an interval type automatic spraying device, the spraying interval time can be freely setThe grinding fluid can be evenly sprayed onto the grinding disc to achieve stability of the workpiece. Reducing grinding time not only saves the cost of consumables, but also meets environmental requirements.
5Imported bearings and motors are used to ensure the stability and lifespan of the equipment, and to meet the precision requirements of the workpiece.

6、The flatness of the grinding disc can reach±0.002mm; Diameter50mmThe flatness of the workpiece after processing can reach1/4Wavelength. The flatness of the workpiece after processing can reach ± 0.0005mm