Product Introduction:

FC-AE terminal network card is a high-performance FC-AE-ASM protocol simulation test terminal network card. The card provides 2, 4, and 8 FC-AE-ASM ports, and the port speed supports 1.0625/2.125/4.25Gbps configurable. The FC-AE terminal network card supports multiple operating system environments and can quickly access the FC-AE-ASM network. Combined with users' actual business applications, it realizes the simulation and testing functions of FC-AE-ASM network bus nodes.

Product Features

• Support FC-AE-ASM protocol

• Compliant with FC-LS and FC-FS protocol standards

• Compliant with Class 1 and Class 3 services

• Supports 2, 4, and 8 FC communication ports

• Supports configurable communication rates of 1.0625Gbps, 2.125Gbps, and 4.25Gbps

• Support expansion to 8.5Gbps communication rate

• Support point-to-point and switching network topology connection methods

• Supports 256 non data blocks and 16 data blocks, each with a capacity of up to 16MB

• Login methods support both implicit and explicit login

• The board provides acquisition mode

·Support point-to-point collection

·Support BYPASS collection

• The board provides fault injection mode

·Support injecting any ARINC664 protocol layer fault

·Support setting fault frame time intervals with microsecond level accuracy

• The board provides a receiving time tag with a time accuracy of 0.5us

• The bit error rate of physical layer data transmission is less than 10-12

• High speed data reception and transmission cache up to 8Gb

• Support IRIG-B time synchronization interface, clock synchronization accuracy of 0.5us

• Provide 2 TTL user configurable trigger I/O

Product Application

Network simulation: The board provides a simulation mode that allows it to operate in an onboard state. Users can use this mode to simulate the working status of onboard bus equipment and the methods of data communication reception and transmission.

Data acquisition: The board provides a data acquisition mode, allowing it to operate in ground acquisition mode and directly collect FC-AE data frames on the network, including all data contents such as SOF/EOF frames, FC-AE frame headers, ASM frame headers, data areas, and CRC check areas.

Fault injection: The board provides a fault injection mode to operate in ground testing mode, supporting FC-AE network fault injection, including frame alignment errors, frame gap errors, SOF errors, EOF errors, CRC errors, FC-AE frame header errors, ASM frame header errors, frame length errors, etc.

Technical Parameter

Ordering Information