Manufacturer mass production XL-KLYP4 experimental 6-inch open mill, plastic rubber mixer, color mixing plate double roll machine

Overview

Experimental 6-inch open mill suitable forUsed in laboratories for industries such as plastics, rubber, silicone, color powder, and polymer materials; This machine uses electric heating to preheat and soften the plastic between two rollers, repeatedly mixing and refining it into smooth, uniform thickness, and single color flakes for color matching or testing

open millHeating up quickly and making samples quickly provide sufficient time for mass production and delivery, as well as a strong basis for large-scale production.

main structure

Experimental 6-inch open millThe desktop structure is mainly composed of a base, a drum upper seat, a 304 # load receiving basin table, and a cover.

This machine consists of transmission device, main engine, roller, roller distance adjustment device, emergency stop brake device, bottom natural exhaust device, electric heating device, and electronic control components. The motor is directly connected to the reducer, and the small sprocket on the output shaft drives the large sprocket on the rear roller shaft. Then, the speed ratio gear on the front roller is driven by the speed ratio gear on the other end of the rear roller, causing the front and rear rollers to rotate in opposite directions.

The roller has forward and reverse rotation and independent heating functions.

This machine is equipped with an emergency stop button for collision mode. Press the stop button immediately in case of safety hazards.

6-inch open millWhen pressing, the surface of the roller should be treated with hard chrome, and metal products should not be used to scrape the surface (bamboo should be used) to avoid damaging its surface

Technical Specifications

Mixed loading capacity: approximately 0.5~10 KG (or customized upon request).

Roller diameter: 163 ± 1mm (or customized according to requirements).

Cylinder working face length: 600 mm (or as required).

Adjustment distance between rollers: about 0~10 mm, can be adjusted freely.

Heating method: electric heating, approximately 3KW x 2 sets of heating elements.

Roller temperature: normal temperature~350 ℃± 12.5 ℃ (static), digital display, adjustable at will.

Heating reference: Rubber heating, room temperature~250 degrees; Plastic heating, room temperature~270 degrees.

Roller speed: about 18-20 revolutions per minute, fixed speed (or customized according to requirements).

Roller speed ratio: factory 1:1 (or customized according to requirements, such as 1:1.25 cylinder ratio).

Deceleration motor: 380V/AC, 3HP, 1350-1420r/min.

Dimensions: Approximately 1380 * 1400 * 800mm (length * height * width).

Power supply/power: three-phase AC 380V/6000W.

Whole machine weight: approximately 2.0T.

3-inch 4-inch experimental open mill display