summary:
The energy recovery and environmental protection equipment room is widely used in equipment in various fields such as power, chemical, electrical and electronic, brewing, etc. The exhaust equipment that has always been used can only neutralize and purify, and there has been no better way to recycle for a long time, resulting in a large amount of energy being wasted. Therefore, our company has successfully developed a comprehensive device for absorbing and reusing exhaust gas. The application of this device not only makes outstanding contributions to environmental protection, but also saves a lot of energy for enterprises and creates higher value.

Principle:
The waste is first discharged through the discharge pipe into the falling film recovery device for cooling and falling film absorption to produce acid. The fine calculated liquid recovered by the falling film recovery device enters the storage tank for recovery through the discharge pipe. The unabsorbed tail gas enters the first stage absorption tower, and the dilute acid liquid recovered by the first stage absorption tower enters the storage tank of this tower. The unabsorbed tail gas enters the second stage absorption tower again. The acid liquid recovered by the second stage absorption tower enters the storage tank of this tower, and the unabsorbed small amount of tail gas enters the vacuum pump. The liquid recovered by the vacuum pump enters the main storage tank, and the standard tail gas absorbed by the vacuum pump is discharged through the exhaust pipe. In the acid production process, the low concentration low acid solution generated participates in the acid circulation reaction. The dilute acid solution produced in the subsequent process is used to supplement the reduced circulation solution in the previous process. After the concentration reaches the process requirements, it is stored centrally. This process completes the acid tail gas recovery process. This series of devices can adopt automatic control to achieve unmanned management mode.

Technical Specifications:

Due to the fact that the YJH series exhaust gas (HCL, SO2, NH, HF, P2O5) recovery devices can be applied to various industries, the types, concentrations, temperatures, and other technical conditions of the recovered gases are not the same, and the types of products recovered by the tower are also different, this series of devices should be designed and selected according to actual conditions to tailor practical and economical exhaust gas (HCL, SO2, NH, HF, P2O5) recovery devices for users.

Features:

The YJH series exhaust gas (HCL, SO2, NH, HF, P2O5) recovery device consists of a falling film recovery device, a first stage absorption tower, a second stage absorption tower, a vacuum pump, an exhaust pipe, and control instruments.
This series of devices can be equipped with automatic control components according to application requirements, such as gas online analyzers, flow sensors (gas, liquid), solenoid valves, liquid level control meters, and control instruments.
This series of devices can be equipped with automatic control components according to application requirements, such as gas online analyzers, flow sensors (gas, liquid), solenoid valves, liquid level control meters, pH control meters, conductivity meters, control cabinets and accessories, etc., to achieve automation of the operation and management of this system.