Selection Guide for Overflow Filling Machine

Working principle:

The supply side (dark blue) of the two-part nozzle is used to pump the product into the container. When the container is filled to the target filling height, the excess product and foam are forced to flow out of the container (red arrow) to the original product source tank through the return side.

Application:

This type of filler is most suitable for liquids with medium to low viscosity. Liquid with solid particles no more than 1/16 "can also be filled. Please note that overflow filler is the preferred machine for handling high-speed foam products

For example:

Sauces, syrups, light colored gel and shampoos, foam cleaners and chemicals, water and other non carbonated water-based beverages.

Advantages:

High performance, easy to clean, easy to operate, and can be expanded at low cost. Provide maximum flexibility at the lowest cost.

Model FOF Manual SEMIAUTO Overflow Packing

Suitable for semi-automatic production of<1000 containers per day

The lowest cost option has limited output. The most suitable for filling large containers, such as gallons and 2.5 gallons.

The operation of the filling machine and bottle handling require both hands.

The filling sequence is completely controlled by the operator.

Requires the minimum floor area (floor area).

Model FOFBT4 desktop semi-automatic overflow packing

Suitable for semi-automatic production of<3000 containers per day

The lowest cost option, but with higher output but still limited. The most suitable for filling small and medium-sized containers, such as 1 ounce to gallon containers.

The operation of the filling machine and bottle handling require both hands.

The filling sequence is completely controlled by the operator.

Requires the minimum floor area (floor area).

Model FOFSEMI BT SEMIAUTO Overflow Packing

Suitable for semi-automatic production of<6000 containers per day

The lowest cost option, with higher output but non upgradable.

The operation of the filling machine and bottle handling require both hands.

The filling sequence is completely controlled by the operator.

Small footprint (footprint).

Model FOFSEMI NT SEMIAUTO Overflow Packing

Suitable for semi-automatic production of<6000 containers per day

Reduce costs, but choose to develop in the future.

Only hands are needed to handle the container.

The filling sequence of Xinyongke is completely determined byShandong filling machineElectronic control. Single cycle operation initiated by foot pedal switch. Requires a small footprint (footprint).