Introduction to specialized reverse osmosis treatment equipment for electronic factories:

In the production process of electronic factories, water is often needed, and ordinary water contains substances such as magazines, bacteria, viruses, etc. Water containing these substances cannot meet the water requirements of electronic devices. Therefore, professional water treatment equipment is needed to purify the water before it can be used. Today, we will introduce this electronic factory specific waterReverse osmosis treatment equipmentIt is specifically developed for electronic factories.

Introduction to installation and operation of specialized reverse osmosis treatment equipment for electronic factories:

1. The first issue is where to install the equipment. To facilitate its operation, we usually install it in a location close to water and power sources.

2. Filter materials are generally used, such as quartz sand, activated carbon, softening resin, etc.

3. Connect the waterway steps by linking the original water pump inlet to the water source, and then connect the outlet of the pre filter to the inlet of the main unit. Both the pre processor and the drainage outlet of the main unit should be connected to the sewer through pipelines.

4. Connect the circuit, the ground wire must be firmly connected, and then connect all the wires to the electrical control box. Please refer to the installation steps and instructions for detailed operation.

Basic parameters of specialized reverse osmosis treatment equipment for electronic factories:

1. Suitable temperature for normal operation of equipment: 4-60 degrees Celsius

2、SDI<10

3. PH allowable range: 5-15

4. Continuous operation

5. Chemical cleaning pH range: 5-11

This electronic factory specific reverse osmosis treatment equipment is a device used in electronic factories. The equipment has a huge processing capacity and can be used in some large electronic factories. At the same time, when designing this equipment, we considered its energy-saving and environmental protection effects, allowing the equipment to process more water in the same unit of time and use less energy than traditional equipment. Large electronic factories consume huge amounts of energy during operation, so even small savings in the same amount of time can save a significant amount of energy overall. In recent years, our company has been continuously developing new environmental protection and energy-saving equipment technologies to align with our sustainable development strategy. We have achieved certain results and welcome new and old customers to come and discuss business.