The electric heating filter produced by Zhengzhou Yuxiang Machinery Equipment Factory is designed in accordance with GMP requirements and consists of two parts: a flexible heating insulation sleeve and a temperature control box. Mainly used to provide heating and insulation function for the filter housing, preventing condensation

The accumulation of water and the growth of microorganisms. Widely applicable to injection water systems, filtration and purification processes, as well as filters and respirators for tanks and containers in industries such as biotechnology, pharmaceuticals, and fermentation.



Main features:

1. Specially designed flexible heating sleeve can fit the filter shell, easy to install

2. Easy to upgrade existing filter housings without the need for repeated investment

3. Integrated composite of heating layer and insulation layer, significantly energy-saving and energy-saving

4. A separate control box can be located as needed, not limited by the installation position of the filter

5. LED digital temperature control system, can set temperature by yourself, easy and convenient to operate

6. Multiple security measures to adapt to different environments.

7. The surface of the heater can be safely touched.



Application:

1. Aseptic filters for exhaust ports of injection water storage tanks and ingredient tanks - prevent condensation from forming inside the filters

2. Freeze dryer vent filter - removes residual condensed water after steam sterilization or moisture after integrity testing

3. Reduce the viscosity of high viscosity materials - making them easier to filter.

Technical parameters:

Heating sleeve material: composite silicone

Temperature sensor: PT100

Working voltage: 220V, 50HZ

Working power: 180W (5 "226 type), 380W (10" 226 type), 700W (20 "226 type)

Power cord: 10A three eye plug

Usage environment: temperature 0-50 ℃; Temperature ≤ 85%; Non corrosive and non strong electromagnetic radiation environments

Temperature control method: intelligent controller, can work in two position mode (P=0) or PID regulation mode;

Controller size: 220 × 155 × 55mm

Temperature setting range: 0-150 ℃

Display error: less than ± 0.5% ± 1 word, less than ± 1.0% ± 1 word

Display mode: Heating temperature - red LED, set temperature - green LED

Protection level: IP65

Exhaust mode: upper row and lower row

Material: outer jacket SU304, inner tube SU316L