VIP member
EMT2705 Electromagnetic Ultrasonic Active Sensor
The EMT2705 electromagnetic ultrasonic active sensor can be directly connected to all traditional ultrasonic flaw detectors, replacing standard piezoe
Product details
EMT2705electromagnetismultrasonicActive sensors can be directly connected to all traditional ultrasonic flaw detectors, replacing standard piezoelectric sensors. They are suitable for measuring the thickness of metal objects, searching for peeling and other defects, without the need for surface treatment or coupling agents.EMT2705 is powered by a 9-volt battery and can work continuously for 20 hours on a single charge. When there is a detection pulse, EMT2705It can start automatically and save power when the device is stopped.
EMT2705PcorrectEMT2705The improved version,EMT2705PUsing polarized shear waves. Users can utilizeEMT2705PTo determine and measure the anisotropy of steel rolling, and in turn, to display the metal stress distribution map and determine the stress-strain state region.
Technical Parameter
|
Type |
9Voltage battery |
|
mode |
2 x CR2032 |
|
mode |
Radial polarized shear waves on the surface plane of the test piece. Direct input of sound waves |
|
Main lobe beamwidth |
9linear measure |
|
Operating Frequency |
4 MHz |
|
aperture |
13 mm |
|
The operating distance between the sensor and the tested component |
Up to 1 mm |
|
Continuous working time for one charge |
20hour |
|
Working temperature range |
-20…+50 °С |
|
size |
38 x 32 x 59 mm |
EMT2705 Electromagnetic Ultrasonic Active Sensor EMT2705 Electromagnetic Ultrasonic Active Sensor EMT2705 Electromagnetic Ultrasonic Active Sensor EMT2705 Electromagnetic Ultrasonic Active Sensor EMT2705 Electromagnetic Ultrasonic Active Sensor
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-