Druck DPI610LP Micro Pressure Calibration Instrument
DPI610PC is an integrated battery powered instrument with a built-in pressure source. It has functions such as pressure control fine-tuning, power output (intrinsic safety type does not have this function), and measurement. It also provides 4-20 mA loop testing and data storage. The instrument structure is sturdy and compact, with a wide screen and dual parameter display, allowing users to clearly read parameter values when operating the DPI610PC hand pump and connecting the test line The milliampere step and slope output, as well as the internal continuous testing function, facilitate the maintenance and repair of the circuit control.

The high precision and ease of use of the calibration instrument are only part of improving data quality and work efficiency. The DPI610PC with data storage function and RS232 interface also has advantages such as shortening calibration time and eliminating data recording errors.

52 pressure ranges to choose from, ranging from 2.5mbar to 700 bar
• Accuracy 0.025% FS
• Integrated pressure/vacuum pump
4~20mA circuit detection tool
RS 232 interface and document creation function
Each instrument can be configured with up to 11 sensors

DPI 610/615PC air pressure calibrator

Hand pump volume regulator release valve pressure interface medium

-850 mbar~20 bar

Pressure adjustment

Ventilation and pressure release control

G 1/8 internal thread

general gas

DPI 610/615LP Micro Pressure Calibration Instrument

Volume regulator release valve pressure interface medium

Double piston for rough/fine pressure adjustment

Ventilation and pressure release control

G 1/8 internal thread, 2 pieces

Non corrosive gas

DPI 610/615HC hydraulic calibrator

Hydraulic pump shut-off valve spiral pressure wheel pressure interface medium

M5 internal thread, drain port

System drainage upon opening

0 ~ 400 bar

G 1/8 internal thread

Demineralized water or general hydraulic oil

Pressure range

DPI 610/615 PC, HC, and LP all include one built-in sensor, and the measurement range of this sensor can be selected from the following table. In addition, each calibrator can order up to 10 external sensors (option B1).