VIP member
Double sided rotor dynamic balance analyzer HS2800H
Name: Double sided Dynamic Balance Calibration Instrument Alias: Portable Dynamic Balance Instrument, Dynamic Balance Instrument, Spindle Dynamic Bala
Product details
| name: |
Double sided dynamic balance calibrator |
| Alias: |
Portable dynamic balancing instrument, dynamic balancing instrument, spindle dynamic balancing instrument, machine tool dynamic balancing instrument, dynamic balancing analyzer
|
Function: |
Specifications |
| Measurement range： |
Acceleration (G): 0.0001-25G
|
|
Speed (mm/s): 0.01~1300mm/s
| |
|
Displacement（μm)：0.01~6,000μm(@1800 rpm)
| |
| Measurement accuracy: |
0.1mG， 0.01mm/s，0.01μm (@1800 rpm)
|
| Measurement speed range: |
300~120000 rpm (real-time monitoring) |
Primary school value: |
0.1mg (acceleration) 0.05mm/s (velocity) 0.01 μ m displacement (@ 1800rpm) |
Colonel positive value: |
6,000μm(@1800 rpm) |
| Vibration measurement unit: |
Acceleration (G): 0-P/velocity (mm/s): 0-P/displacement（μmPeak to Peak)：P-P
|
| Operation method: |
Guided operation mode
|
| Collecting signals: |
Signal type and unit can be freely set
|
| Humidity range: |
0% ~ 80%Relative humidity (no condensation)
|
| Signal type: |
Acceleration, velocity, displacement, and communication/DC voltage, AC/DC current
|
| Dynamic balance function: |
Double sided dynamic balancing, vibration analysis, rapid dynamic balancing analysis, etc
|
| Storage interface: |
1USB 2.0 port/USB flash drive
|
| Correction phase angle accuracy: |
0.1°
|
| Speed sensing method: |
Laser probe sensing
|
| Speed sensing distance: |
50mm-100mm
|
| Acceleration sensitivity: |
100mV/g
|
| Central Processing Unit |
Vortex 300MHz(32Bit rate high-speed processor)
|
| monitor: |
320x240Dot LCD display/ LEDHigh brightness backlight/touch sensitive
|
| Working temperature: |
0℃-50℃
|
| Power consumption: |
7W
|
| Storage battery: |
Rechargeable lithium batteries,Charging time2-3 hours, working time>7 hours after full charge
|
| Power Supply: |
110V/220V Vac
|
| Host size: |
210 x 190 x 45 (mm)
|
| Host weight: |
1.2Kg (including battery)
|
| Accessories: |
Acceleration gauge (including 2 magnetic seats)Fiber optic speed sensor (including magnetic seat * 1), power cord * 1
|
| spare parts: |
Including scissors, reflective stickers, glue, angle ring, electronic scale, Chinese user manual, carrying case * 1
|
| country of origin: |
Taiwan
|
Product Features:
Suitable for dynamic balance correction/monitoring/analysis of various rotor lines in machinery/motors
Can be used for single-sided or double-sided dynamic balancing correction/monitoring/analysis of various rotors
Can be used for converting vibration units/setting allowable vibration values/presenting power status
Dynamic balance correction can be performed using either weighted or de weighted methods
Built in ISO1940 rotor balance level calculation
New touch screen LCD display
Can be used for hole allocation/drilling depth calculation
Li-On rechargeable
It has the functions of external balancing of various rotor lines before assembly and online balancing correction after assembly
Contains data storage for program upgrade/data storage/printing reports/language conversion
Sensor detection function
Mobile USB Flash Disk/Compact Mini Portable
Dynamic balancing function of three balancing blocks for grinding machine (including PY2700 series instrument functions)
Dynamic balancing instrumentControl panel and interface descriptionbright
equipmentPH06 laser light sensor speed (300-1200000rpm)
Application interface of dynamic balancing instrument:
Dynamic balancing startup interface: including grinding wheel dynamic balancing and rotor dynamic balancing functionsClick to enter the wheel dynamic balancing function interface, includingPY2700Gfunction
Click to enter the rotor dynamic balancing interface. If new dynamic balancing is required, click on single-sided dynamic balancing to enable the rotor instrument to display speed, vibration value, and center of gravity angle. Click to enter the calculation settings
The calculation setting page includes multiple dynamic balancing methods (this page indicates that a weight of 77.13g can be added at a 47.2 degree position). Drilling and weight removal function: mostly used for motors, motors, etc
Hole allocation function: High precision spindle, machine tool machining center and other machining surfaces are reserved with counterweight holes. International standard ISO-1940 balance level
Principle of rotor dynamic balance:
Machinery contains a large number of components that move by rotationComponents such as various drive shafts, main shafts, electric motors, impellers, and turbine rotors are collectively referred to as rotors.
In an ideal situation, the pressure exerted on the bearings is the same when the rotating body rotates and when it does not rotate, making it a balanced rotating body.
Uneven material of the rotating body generates vibration and noise
Due to various factors such as uneven material or blank defects, errors in processing and assembly, and even asymmetric geometric shapes in design, various rotating bodies in engineering can be affected,
When the rotating body rotates, the centrifugal inertia force generated by each tiny particle on its surface cannot cancel each other out. The centrifugal inertia force acts on the machinery through bearings, causing vibration and noise,
And accelerating bearing wear shortens mechanical life, which can cause destructive accidents in severe cases.
Causes of vibration:
Factors such as imperfect materials, manufacturing precision limitations, and wear and tear after use can cause vibration in moving objects.
The rotor must be balanced to achieve the allowable balance accuracy, and the generated mechanical vibration amplitude must also be reduced within the allowable range.
On site dynamic balancingApplication: Machine tool dynamic balance, motor dynamic balance, spindle dynamic balance, grinder dynamic balance
On site dynamic balancing instrument applied to various precision grinding machines: grinding wheel dynamic balancing、Spindle dynamic balance
On site dynamic balancing instrument applied to various precision grinding machines: grinding wheel dynamic balancing
On site dynamic balancingApplication: Grinding machineDynamic balancing, machine toolsChuck dynamic balance
On site dynamic balancingApplication: Motor dynamic balancing, grinder dynamic balancing
On site dynamic balancingApplication:Method of hole allocationSpindle debugging
Difference between single-sided rotor dynamic balancing and double-sided rotor dynamic balancing:
The deviation of the center of mass of the rotor from the rotation center of the machine will inevitably cause machine vibration, and excessive vibration will cause damage to the machine. It must undergo action balance correction.
When the outer diameter of the rotor is much smaller than the axial length, double-sided dynamic balancing is used for rotor dynamic balancing correction;
When the outer diameter of the rotor is much larger than the axial length,Single side dynamic balancing is used for rotor dynamic balancing correction.
Single side dynamic balancing refers to adding or removing counterweights on only one calibration surface of the rotor. Whether to use single-sided or double-sided dynamic balancing depends on the on-site workpiece and whether there is space for dynamic balancing.
The dynamic balance of the two channel signal analyzer can provide single, double-sided, and cantilever double-sided dynamic balance correction.
The deviation of the center of mass of the rotor from the rotation center of the machine will inevitably cause machine vibration, and excessive vibration will cause damage to the machine. It must undergo action balance correction.
When the outer diameter of the rotor is much smaller than the axial length, double-sided dynamic balancing is used for rotor dynamic balancing correction;
When the outer diameter of the rotor is much larger than the axial length,Single side dynamic balancing is used for rotor dynamic balancing correction.
Single side dynamic balancing refers to adding or removing counterweights on only one calibration surface of the rotor. Whether to use single-sided or double-sided dynamic balancing depends on the on-site workpiece and whether there is space for dynamic balancing.
The dynamic balance of the two channel signal analyzer can provide single, double-sided, and cantilever double-sided dynamic balance correction.
After sales service hotline:
Brand official website: http://www.hofusen.com
Service commitment:
Hongfuxin Precision Technology (Beijing) Co., LtdLimited companies provide not only products but also services to users.HongfuxinWe value reputation, technology, and service. We deeply understand that customers are the foundation of a company's survival, and service is the source of its development. We have always provided one-stop pre-sales, in sales, and after-sales services based on the characteristics and actual requirements of our customers, including recommended solutions, process design, equipment configuration, equipment installation and adjustment, personnel training, long-term maintenance, and upgrades. If you have measurement difficulties but have not yet used our products or have purchased our products, but still have opinions or suggestions about our services, please download the following pre-sales customer survey and after-sales customer feedback form, fill them out and return them to us. We will provide you with reasonable solutions and adopt your valuable opinions and suggestions, and provide you with high-quality products and services! Thank you for your support and welcome to enjoy our services!
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-