The main components of the dual arm welding smoke and dust collector include: universal vacuum arm, vacuum hose, vacuum hood (with air volume regulating valve), flame retardant mesh, flame retardant filter element, pulse blowback device, pulse solenoid valve, pressure difference gauge, clean room, activated carbon filter, ash settling drawer combination, combustion supporting and sound-absorbing cotton, new Korean style wheels with brakes, fan, ABB motor, and electrical control box.

Working principle of dual arm welding smoke dust collector:

Through the gravitational force of the fan, the welding smoke and exhaust gas are sucked into the equipment inlet through the universal vacuum hood. A flame arrester is installed at the equipment inlet, and sparks are blocked by the flame arrester. The smoke and dust gas enters the settling chamber, and the coarse dust is first directly lowered to the ash hopper by gravity. The fine smoke and dust are captured on the outer surface by the filter element. After being filtered and purified by the filter element, the clean gas flows into the clean room from the center of the filter element. The clean air is further purified by the activated carbon filter before being discharged through the outlet to meet the standard.

The main components of the dual arm welding smoke dust collector include: two 2-4m long flexible or rigid suction arms, a suction hood (with air volume regulating valve), a flame retardant mesh, a flame retardant filter element, a clean room, a film filter, a dust recovery box, flame retardant sound-absorbing cotton, a fan, a motor and an operation panel, and enlarged polyurethane rubber wheels (two fixed and two active brakes).

1. The dual arm welding smoke dust collector adopts a filter cartridge, which has good purification effect and filtration.

2. Equipped with casters, it can move freely to meet flexible welding needs. The suction arm can move flexibly and rotate 360 degrees, hovering freely to solve pollution problems from the source and prevent pollutants from spreading indoors.

3. Drawer style dust box design, convenient for daily maintenance and upkeep.

4. Using energy-saving motors, energy-saving and environmentally friendly.

5. The fully automatic electronic pulse blowback system can be used for cleaning, leaving no dead corners, improving the filtration efficiency of the purifier, enhancing the purification effect, and extending the service life of the filter cartridge.

Characteristics of dual arm welding smoke dust collector:

1. Using microporous membrane filter material, the large filtration area of the three filter cartridges significantly improves the service life of the filter cartridges with relatively low filtration air velocity. Normal use for 2 years does not require replacement of the filter cartridge, reducing operational and maintenance costs.

2. The compact structural design and perfect internal structure result in low overall filtration resistance and small footprint.

3. The structure of the fan ensures high air volume, low noise, and stable operation.

4. The operation is simple and convenient, with a complete automatic control system inside. It can not only achieve automatic online reverse blowing and dust cleaning, but also realize fault alarm and automatic shutdown. The flexible movable cantilever has two types for users to choose from: joint built-in and external. It can not only achieve air self-locking, but also move up, down, left and right. Temperature resistant hoses have a long service life.

5. Wheels with self-locking mechanisms allow for flexible movement, expanding their range of use and increasing equipment utilization.

Scope of application of dual arm welding smoke dust collector:

The dual arm welding smoke dust collector is used for purifying smoke and dust generated during welding, polishing, cutting, grinding and other processes, as well as for recycling metals and precious materials. It can purify a large amount of small metal particles suspended in the air that are harmful to the human body. It has the characteristics of purification, low noise, flexible use, and small footprint. Suitable for workplaces that generate smoke such as arc welding, carbon dioxide shielded welding, MAG welding, carbon arc gas gouging welding, gas fusion cutting, and welding.