1、 Product Features
1. The quality of the produced water meets the water standards of the National Disinfection Supply Center
2. Adopting PLC LCD touch screen centralized control, it can achieve fully automatic control. Through liquid level interlocking, the equipment automatically starts and stops, realizing unmanned operation
3. It has functions such as automatic water production, automatic flushing on/off, automatic shutdown when the raw water is short/the water tank is full, high and low pressure alarm, overheating protection, etc.
4. Multi functional monitoring realizes online display of parameters such as pressure, flow rate, conductivity, etc
5. Intelligent balancing system ensures the safe and stable operation of equipment
6. Pre processing has automatic flushing function, simplifies operation, and extends equipment service life
7. The design of the actuator adopts standardized, universal, and systematic components, which are easy to disassemble, replace, and clean.
8. The integrated structure of the reverse osmosis host occupies a small area and effectively saves space.
9. The system has low energy consumption and effectively saves energy.
10. Long consumable life and low water production cost.
11. The system operates reliably, the water supply pipeline is closed, and the effluent quality is stable.

2、 Technical parameters
1. Produced water quality: meets the standards of the Hospital Disinfection Supply Center of the People's Republic of China;
2. Ion removal rate: ≥ 99%;
3. Removal rate of endotoxins and bacteria: ≥ 99%;
4. Recovery rate: ≥ 70%;
5. Inlet requirements: Municipal water supply, supply pressure: 0.2Mpa-0.4Mpa, hardness ≤ 8mmol/L, inlet temperature: 5-35 ℃;
6. Power supply voltage: AC380V, three-phase five wire, reliable grounding;
7. Environment: Temperature: 5-40 ℃, humidity<85%, no dust and strong electromagnetic interference.

3、 Environmental requirements for use
1. Inlet requirements: The water quality meets the GB5749-2006 standard, and the water pressure is 0.1-0.4MPa;
2. Power supply: 380V/50Hz, three-phase five wire system, reliable grounding;
3. Environmental temperature: 5-35 ℃;
4. Environmental humidity: ≤ 80% RH;
5. Installation site: The ground is flat and waterproof, with unobstructed drainage floor drains or drainage ditches, and no direct sunlight;
6. This product should avoid operating in environments with strong magnetic or magnetic field interference.

4、 Equipment configuration

◇ The incoming water is municipal tap water

◇ Fully automatic continuous water production, automatic protection, no need for manual supervision
◇ Can be directly used in conjunction with disinfection and cleaning equipment
◇ Using precision instruments, online, accurate analysis, and display of water quality
◇ Multi medium filter (equipped with imported automatic control valve, quartz sand, manganese sand)
Activated carbon filter (equipped with imported automatic control valve and purified fruit shell carbon)
◇ Fully automatic resin softener (equipped with imported automatic control valve and nano type cation resin)
Reverse osmosis system: Clean various ions, bacteria, heat sources, etc. in water to prepare pure water
◇ The electrical control adopts PLC automatic control
◇ Meet the acceptance requirements of the disinfection supply room
The quality of the produced water meets the national disinfection supply room water standards

5、 Application scope

Hospital disinfection supply room water (used in conjunction with various cleaning machines, cleaning vehicles, ultrasonic cleaning, and high-pressure sterilization equipment) is used for cleaning containers used in the pharmacy department and supply room of the hospital.