Main purpose
JGX-2E Digital Display Large ToolmicroscopeIt has the characteristics of easy operation, convenient reading, and accurate measurement. This series of digital display large toolsmicroscopeIt is a fundamental precision optical measuring instrumentlargeTool microscopeA multifunctional measuring instrument widely used by metrology departments in machine manufacturing factories, scientific research institutions, and universities. The following measurements can be made:
1. Verify the shape of the sample, sample cutter, sample milling cutter, die, and cam.
2. Measure the pitch, outer diameter, inner diameter, pitch, helix angle, and helix angle of the thread axis to determine the profile position and thread shape (such as tooth roundness, flatness, flatness, etc.).
3. Measure the helix angle of thread cutting tools, thread comb cutting tools, thread milling cutters, various template milling cutters, and template profile angles of various shapes.
4. Measure the width of the inner hole and various grooves using an optical locator.
5. Measure the center distance between two holes and the distance between slits, line segments, or symmetrical shapes on the part using a binocular eyepiece.
6. By using a circular arc contour eyepiece, it is convenient and accurate to measure the circular arc dimensions of R0.1~R100.
Technical Parameter
1．Measurement accuracy:
Accuracy of micrometer drum: 0.01mm
Angle accuracy in angle measuring eyepiece: 1 '
Angle accuracy in contour eyepiece: 10 '
Circular worktable angle accuracy: 3 '
Accuracy of pole tilt ruler: 30 "
2．measuring range:
Longitudinal travel:
Application micrometer screw: 0-25mm
Application of micrometer screw and measuring block: 0-150mm
Cross travel
Application micrometer screw: 0-25mm
Application of micrometer screw and measuring block: 0-50mm
Angle division range of angle measuring eyepiece: 0-360 °
Circular worktable angle range: 360 °
Contour eyepiece angle division range: ± 7 °
Lateral tilt range of microscope column: ≈± 12 °
Round worktable diameter: 280mm
Microscope cantilever extension length: ≈ 167mm
Distance between workbench and objective lens: maximum 130mm
The allowable length of the workpiece for the ejector pin holder:
Workpieces not exceeding ф 39: maximum length 315mm
Workpieces not exceeding ф 85: maximum length 235mm
The maximum diameter of the workpiece clamped by the V-shaped bracket is 130mm
3Magnification factor: