VIP member
Differential probe (13-25 GHz)
Active differential probes are similar to combining two probes into one probe, no longer using ground as a reference like single ended active probes.
Product details
|
D1305-A-PS- 13 GHz Complete Probe System with Solder-In Tip (13 GHz) and Positioner Tip Browser (13 GHz) |
|
D1605-A-PS- 16 GHz Complete Probe System with Solder-In Tip (16 GHz) and Positioner Tip Browser (16 GHz) |
|
D2005-A-PS- 20 GHz Complete Probe System with Solder-In Tip (20 GHz) and Positioner Tip Browser (20 GHz) |
|
D2505-A-PS- 25 GHz Complete Probe System with Solder-In Tip (25 GHz) and Positioner Tip Browser (22 GHz) |
|
D1305-A- WaveLink D1305 13 GHz/2.0Vp-p Differential Probe Amplifier with Dxx05-SI Solder-In Tip (Qty. 2) |
|
D1605-A- WaveLink D1605-A 16 GHz/2.0Vp-p Differential Probe Amplifier with Dxx05-SI Solder-In Tip (Qty. 2) |
|
D2005-A- WaveLink D2005-A 20 GHz/2.0Vp-p Differential Probe Amplifier with Dxx05-SI Solder-In Tip (Qty. 2) |
|
D2505-A- WaveLink D2505-A 25 GHz/2.0Vp-p Differential Probe Amplifier with Dxx05-SI Solder-In Tip (Qty. 2) |
|
WL-PLINK-A-CASE- WaveLink ProLink Platform/Cable Assembly Kit for Dxx05-A 13-20 GHz WaveLink Probes. |
|
WL-2.92MM-CASE- WaveLink 2.92mm Platform/Cable Assembly Kit for D2505-A 25 GHz WaveLink Probes. |
|
Dxx05-PT-KIT- WaveLink Dxx05-PT (up to 22 GHz rating) Adj. Positioner Tip Kit. For use with Dxx05-A amplifiers. |
|
DXX 05 -si- Replacement Dxx05-SI 13-25 GHz Solder-In Lead with Qty. 5 Spare Resistors. |
|
EZ Probe- Cascade Microtech EZ-Probe Positioner |
|
TF-DSQ- Probe Deskew and Calibration Test Fixture Limited Availability |
|
LPA-2.92- ProLink to 2.92mm Adapter with Probe Power and Communication Pass Through |
|
D1305-A-CCNIST- NIST Calibration for D1305-A. Includes test data. |
|
D1605-A-CCNIST- NIST Calibration for D1605-A. Includes test data. |
|
D2005-A-CCNIST- NIST Calibration for D2005-A. Includes test data. |
|
D2505-A-CCNIST- NIST Calibration for D2505-A. Includes test data. |
Key Features
·13 GHz, 16 GHz, 25 GHz bandwidth options available
·Bandwidth level of probe and oscilloscope combination
·Automatically optimize probe and oscilloscope performance
·2.0Vpk pk dynamic range
·± 2.5V bias range
·Probe system (- PS model) provides complete capability
·Advanced portable soft bag
·Long welding front end with replaceable resistors
·Optimization of signal integrity and load for carbonization point measurement front-end
·Super probe impedance minimization load effect
·Probe noise as low as 14 nV/√ Hz
WaveLinkhigh bandwidth(13-25) GHzDifferential probe
The Dxx05-A 13-25 GHz differential probe from Lico is a high-performance, high bandwidth testing probe with a large dynamic range, bias range, and low noise.
Complete detection system
A cost-effective comprehensive detection kit, including differential amplifier, soldering front-end (X2), point measurement front-end, cables, matching connection parts, brackets, and other accessories. The probe and accessories are packaged in a portable soft bag, making it very convenient and easy for you to choose the bandwidth you need.
High dynamic range and bias range
Unbelievable 2.0Vpk-pk high dynamic range and bandwidth up to 25GHz, as well as large bias capability.
Advanced portable soft bag
A high-end portable pouch is very convenient for packaging all parts of the probe system.
High performance welding front-end
A long welding front end with replaceable resistors, the external resistor end makes the impedance of the front end very close to the impedance of the test point,
To minimize circuit load.
Maximizing signal integrity in the front-end of carbonization point measurement
The use of carbonized fiber optic resistors in the point measurement front-end provides an ideal distributed impedance for the testing point, which is unique to Lico and provides improved signal integrity.
Super probe impedance
Compared to other high bandwidth probes, the circuit and signal load have been reduced by 50%, greatly reducing the impact on testing.
|
model |
bandwidth |
Input dynamic voltage |
Common mode voltage |
bias voltage |
attenuation |
DC impedance |
Oscilloscope interface method |
The method of connecting the tested object |
|
WL-2.92MM-CASE |
Prolink |
|||||||
|
-D2505 |
25GHz |
2.0Vpk-pk |
±4V |
±2.5V |
4.5x |
Differential 1k Ω Common mode 100 k Ω |
|
Welding and spot testing are optional |
|
-D2005 |
20GHz |
2.0Vpk-pk |
±4V |
±2.5V |
4.5x |
Differential 1k Ω Common mode 100 k Ω |
|
Welding and spot testing are optional |
|
WL-PLINK-A-CASE |
Prolink |
|||||||
|
-D1605 |
16GHz |
2.0Vpk-pk |
±4V |
±2.5V |
3.5x |
Differential 1k Ω Common mode 100 k Ω |
|
Welding and spot testing are optional |
|
-D1305 |
13GHz |
2.0Vpk-pk |
±4V |
±2.5V |
3.5x |
Differential 1k Ω Common mode 100 k Ω |
|
Welding and spot testing are optional |
|
WL-PLINK-CASE |
Prolink |
|||||||
|
-D1330 |
13GHz |
3.5Vpk-pk |
±5V |
±4V |
3.75x |
Differential 200k Ω Common mode 50 k Ω |
|
Welding and spot testing are optional |
|
-D1030 |
10GHz |
3.5Vpk-pk |
±5V |
±4V |
3.75x |
Differential 200k Ω Common mode 50 k Ω |
|
Welding and spot testing are optional |
|
-D830 |
8GHz |
3.5Vpk-pk |
±5V |
±4V |
3.75x |
Differential 200k Ω Common mode 50 k Ω |
|
Welding and spot testing are optional |
|
-D600A-AT |
7.5GHz |
±2.4V |
±2.4V |
0 |
2.5x |
4 kΩ |
|
Adjustable spacing and point testing |
|
-D500PT |
5GHz |
±2.4V |
±2.4V |
0 |
2.5x |
4 kΩ |
|
Adjustable spacing and point testing |
|
-D610-PT |
6GHz |
±1.25V |
±4V |
±3V |
1.5x |
100 kΩ |
|
Adjustable spacing and point testing |
|
-D620-PT |
6GHz |
±2.5V |
±4V |
±3V |
2.5x |
100 kΩ |
|
Adjustable spacing and point testing |
|
-D610 |
6GHz |
±1.25V |
±4V |
±3V |
1.5x |
100 kΩ |
|
Welding type, socket type, etc |
|
-D620 |
6GHz |
±2.5V |
±4V |
±3V |
2.5x |
100 kΩ |
|
Welding type, socket type, etc |
|
WL-Pbus-CASE |
ProBus |
|||||||
|
-D300A-AT |
3GHz |
±2.4V |
±2.4V |
0 |
2.5x |
4kΩ |
|
Adjustable spacing and point testing |
|
-D410-PT |
4GHz |
±1.25V |
±4V |
±3V |
1.5x |
100kΩ |
|
Adjustable spacing and point testing |
|
-D420-PT |
4GHz |
±2.5V |
±4V |
±3V |
2.5x |
100kΩ |
|
Adjustable spacing and point testing |
|
-D410 |
4GHz |
±1.25V |
±4V |
±3V |
1.5x |
100kΩ |
|
Welding type, socket type, etc |
|
-D420 |
4GHz |
±2.5V |
±4V |
±3V |
2.5x |
100kΩ |
|
Welding type, socket type, etc |
|
ZD1500 |
1.5GHz |
±8 V |
±10V |
±18 V |
|
120 kΩ |
|
Jack type |
|
Zd1000 |
1 GHz |
±8 V |
±10V |
±18 V |
|
120 kΩ |
|
Jack type |
|
Zd500 |
500MHz |
±8 V |
±10V |
±18 V |
|
120 kΩ |
|
Jack type |
|
AP033 |
500MHz |
±40 V |
±42 V |
±40 V |
|
1M |
|
Jack type |
|
|
|
|
|
|
|
|
|
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-