1、 Equipment Introduction and Functions:

Grinding wheel dressing machinecorrectutilizeThe repaired and repaired grinding wheelThe difference in materials andThe principle of speed difference is used to achieve shape adjustment of the repaired grinding wheel. The machine itself can handle diamond grinding wheelsCBN grinding wheels can be used for simple and efficient dressing of flat, angular, and shaped grinding wheels.

This machine tool will repair grinding wheels andRepaired grinding wheelInstalled separately in two sets of precisionadvancegiveCross slide tableOn the assembly（rollerX-Y slide table groupassemblyWithX’-Y’Correct the slide table assemblyAssembly). alsoInstalling a roller cross slide tableadvancetoMicro feed deviceIt's possibleRepairedrollerThe locationperformaccurateadjust.This machine toolHas the following characteristics:

1Trimming the grinding wheel shaftNT40-2 power head, increasing the rigidity of the sand wheel axle for maintenance. BT40 inner hole accuracy: 0.005. BT40 extended grinding wheel rod.

2Adjust the front and rear feed directions of the sanding wheel shaftDigital displayrulerperformaccurateAdjustment.

3Replace the four linear feed axes with pitch3mm precision screw rod.

4. RepairedrollThe position of the wheel is determined by the cross slide tableFeed rate（RedesignX-Y slide table groupAssembly).Install in both directions of the roller cross slide tableadvancegiveMicro feed deviceAnd installDigital displaychiperformaccurateAdjustment.

5RepairedrollwheelThe spindle has an outer diameter100. Inner bore Mohs No. 4 spindle assembly. Inner hole accuracy: 0.003.

5. ManualrotateaxisinstallNSK high-precision tapered roller bearings ensure a rotation accuracy of 0.005mm for the turntableAdded a circleencoder.

6. RepairedrollwheelThe axis is clamped in a two point form，The top of the tailstock is Mo'sNumber 2. The top of the tailstock must not interfere with the dressing wheel shaft when rotating 75 degrees.

7RepairedrollingwheelThe axis is the distance between two centers120mm. Accuracy: upper busbar: 0.005, side busbar: 0.005.

correctutilizeThe repaired and repaired grinding wheelThe difference in materials andThe principle of speed difference is used to achieve shape adjustment of the repaired grinding wheel. The machine itself can perform simple and efficient dressing on diamond grinding wheels and CBN grinding wheels, including flat, angular, and shaped grinding wheels.

This machine tool will repair grinding wheels andRepaired grinding wheelInstalled separately in two sets of precisionadvancegiveCross slide tableOn the assembly（Roller X-Y sliding table groupassemblyWith X’-Y’Correct the slide table assemblyAssembly). andInstalling a roller cross slide tableadvancegiveMicro feed deviceIt's possibleRepairedrollerwhereperformaccurateadjust.