1Cold and hot cycle analyzer(High and Low Temperature Exchange Device) Product Introduction:

TC-501F typeCold and hot cycle analyzer(also known as high and low temperature exchange device) is a new type of product that circulates experimental materials cold and hot,It can be used to determine the temperature fatigue aging performance of materials, providing stable and reliable test conditions for material testing.It can automatically lift the experimental materials from one temperature zone water tank and place them in another temperature zone water tank. After reaching the set time, it can then return the experimental supplies from the other temperature zone water tank to the original temperature zone water tank, and repeat this process.

This product has an automatic counting function, which can repeatedly transfer relevant items from one temperature zone to another within the set counting range. Users can automatically set the time for the product to be placed in the temperature zone and the switching speed between the two temperature zones.This product adopts a microcomputer intelligent control system, fully microcomputer controlled (fully upgraded from the previous two generations), easy to operate, and can be widely used in dental hospitals and other related scientific research departments. This product is a domestic product, and its launch provides necessary technical support for dental research.This product is mainly used for the research of oral and dental materials, and can also be used in medical, chemical, pharmaceutical, university laboratories and related research institutes, laboratories and other institutions.

IICold and hot cycle analyzerWorking principle of high and low temperature exchange device:

The exchange and immersion of samples between high and low temperature tanks are completed by mechanical units, and this instrument is a single arm rotating immersion type. After immersing the sample in the low-temperature tank for a certain period of time, remove it from the liquid level, rotate it 180 °, and then re-enter the high-temperature tank. After staying for a certain period of time, remove the liquid level again as a cycle, and the technician counts once. After the sample is raised from the water surface, it is transferred from the low-temperature tank to the high-temperature tank and immersed in the water surface again with an adjustable time interval of about 2-300 seconds (also known as this instrument)Cold and hot cycle analyzer）.

IIICold and hot cycle analyzerTechnical parameters of high and low temperature exchange device:

1. Temperature control range of low-temperature bath: 0-100 ℃, constant temperature wave degree: ≤ ±0.5℃；

Temperature control range of the constant temperature bath: RT+5-100 ℃, constant temperature wave degree: ≤ ± 0.8 ℃.

The accuracy is ± 0.1 ℃, and the uniformity is ± 0.3 ℃.

2. Low temperature tank cooling power: 368W; Heating power: 800W × 2 (dual slot).

3. Effective volume of liquid tank: ≥ 10L； The net size of the studio is 300 × 250 × 180mm.

4. Adjustable range of slot to slot conversion speed: 2-20 rpm

5. Adjustable range of dwell time in the slot: 2-300 seconds (conversion time tentatively set at 30 seconds)

6. Adjustable range of cycle times: 1-9999 times

7. Controller surface: LED display, capable of controlling temperature, conversion speed, dwell time, and number of cycles

8. The load of the conversion bracket shall not be less than 250G.

9. Reference values for external dimensions: 670 × 550 × 780mm.

10. Power supply voltage: 220V, 50Hz.

11. The outer shell is made of 1.0 cold plate electrostatic spraying, and the inner liner is made of high-quality 304 stainless steel.

Jintan Kanghua Electronic Instrument Manufacturing Factory

Address: Jintan City, Jiangsu Province Jincheng Industrial Park Hongshan Road22name

：0519-82821071 0519-82482233

Xu Kang （0）

：，755724419, 755724420

:www.kanghua17。。 ｃｏｍ ：kanghua179