The DX2520 with turret end face milling machine can be widely used for machining flat surfaces, inclined surfaces at any angle, milling keyways, grooves, and can also rotate, hinge, and bore holes. Its milling head can rotate left and right by 90 degrees, front and rear by 45 degrees, and the slider can rotate 360 degrees horizontally. The spindle has a wide range of speed changes and high rotational speed. The spindle sleeve can be driven with fixed feed and is equipped with overload protection device. The spindle sleeve, machine tool guide rail, and worktable have all undergone high-frequency hardening treatment, making them beautiful and practical. The vertical turret milling machine can be optionally equipped with a motorized feed device and a digital display system.

Vertical turret milling machine, also known as rocker arm milling machine or milling machine, is a type of turret milling machine and belongs to the category of milling machines. The difference between a vertical turret milling machine and a turret milling machine is that its spindle can only feed vertically, and the direction of spindle travel forms a 90 ° angle with the worktable plane, so it is called a vertical turret milling machine.

The main features of DX2520 with turret end face milling machine are:

Front and rear slides and high-frequency hardening treatment, grinding.

The surface of the spindle tube is subjected to high-frequency hardening treatment, resulting in a high degree of hardness and grinding.

Hardening treatment and grinding of the lifting seat slide.

Y. The Z-axis is a square slide.

The X-axis is a dovetail slide.

The bed is cast as a whole, with strong rigidity and long service life.

DX2520 with turret end face milling machine maintenance:

1. Cleaning: Disassemble and clean the oil scraping skin of each part; Wipe each sliding surface and guide rail surface, wipe the worktable and horizontal, lift the screw, wipe the cutter and knife holder.

2. Lubrication: Keep each oil hole clean and add 32 # lubricating oil; Add lubricating oil to each guide surface, sliding surface, and screw; Check the oil pot, oil level, and add oil to the elevation position.

3. Tighten: Check and tighten the pressure plate and strip screws; Check and tighten the limit screws of the workbench, the transmission mechanism of the cutter, the three ball handle, and the screws of the workbench bracket.

4. Adjustment: Check and adjust the tightness of the milling head belt, pressure plate, and insert strip appropriately; Check and adjust the limit block and screw clearance.

5. Corrosion prevention: Remove rust from all parts, protect the painted surface, and avoid collision; Apply oil and anti-corrosion coating to the guide rail surface, sliding screw handwheel, and other exposed parts that are prone to rusting of idle and backup equipment.