product overview
The newly invented micro total phosphorus automatic analyzer by Delin Company is based on liquid flow integrated ceramic chip technology and uses ammonium molybdate spectrophotometry to determine the total phosphorus content. The total amount of reagents for a single measurement shall not exceed 0.7ml. This instrument is lightweight, small in size, and easy to operate.
application area
This instrument can directly measure tap water, Rivers and Lakes water, industrial sewage, etc. It can be widely used in water quality automatic monitoring stations, sewage treatment plants, water treatment plants, sewage monitoring points, water quality analysis rooms, and environmental regulatory agencies at all levels to monitor the water environment.
Instrument characteristics
★The measurement method complies with the provisions of the national standard GB 11893-89 and has good consistency with manual analysis.
★The liquid flow integrated ceramic chip technology independently developed by Delin achieves a single consumption of less than 0.7ml of reagents.
Technical Parameter
project |
TECHNICAL INDEX |
test method |
Ammonium molybdate spectrophotometric method |
measuring range |
0.02~10mg/L(Can be adjusted as needed) |
detection limit |
≤0.01mg/L |
accuracy |
±5% |
repeatability |
≤5% |
digital communication |
RS232/RS485Serial communication, Ethernet, mobile phoneAPPComputerAPPViewing measurement data on computer web pages |
working voltage |
Communication(220±22)V |
Record storage |
Storable10000The test results show that data will not be lost even if there is a power outage |
ambient temperature |
(5 ~forty |
)℃ |
Instrument dimensionslong×wide×High(232×153×132) |
mm |
weight |