DK-8DDigital constant temperature water bathFor each hole, a separate digital display temperature control is used. The sink is made of high-quality stainless steel plate and machined with high temperature resistance and corrosion resistance. The temperature control device has stable performance, short thermal equilibrium time, small temperature fluctuations, good uniformity, and LED display that is intuitive. Widely applicable to laboratories in universities, petroleum, chemical, pharmaceutical, environmental protection and other industries.

Digital constant temperature water bathTechnical Specifications:

Specification, model, type, power supply, heating power, temperature control range, water temperature fluctuation, temperature control accuracy, working volume (cm3)
DK-8D dual hole 220V 50HZ 600W RT-100 ℃≤ 0.5 ℃≤ 0.5 ℃ 16 × 16 × 13 per hole
DK-8D three hole 220V 50HZ 900W RT-100 ℃≤ 0.5 ℃≤ 0.5 ℃ 16 × 16 × 13 per hole
DK-8D four hole 220V 50HZ 1200W RT-100 ℃≤ 0.5 ℃≤ 0.5 ℃ 16 × 16 × 13 per hole

DK-8D five hole 220V 50HZ 1500W RT-100 ℃≤ 0.5 ℃≤ 0.5 ℃ 16 × 16 × 13 per hole
DK-8D six hole 220V 50HZ 1800W RT-100 ℃ ≤ 0.5 ℃ ≤ 0.5 ℃ Each hole 16 × 16 × 13

• structure：

This product is a sink type with a high-quality inner linerManufacturing of stainless steel plates and machining processesThe outer shell is made of high-quality cold-rolled sheet and sprayed with plastic. The inner liner and outer shell are insulated with glass wool for fast and energy-saving heating. It is equipped with a constant temperature regulator, and users can set the temperature according to their needs.

• Usage:

• When in use, water can be added according to the required capacity to shorten the heating time. (Be careful not to add too much water to prevent it from spilling out of the pot when boiling, and ensure that the water level in the pot is not lower than the sieve, that is, the electric heating tube in the pot should not be exposed to the water surface to avoid burning out the electric heating tube and causing water leakage). Connect the power, turn on the power switch, and the indicator light will turn on.
• Set the temperature,pressSETThe key can be used to set or view the temperature setpoint. pressSTEThe key characters start flashing, indicating that the instrument panel has entered the set state. Press△▽Key setting value increases or decreases, long press△or▽The key data will change quickly, press againSETThe key instrument panel returns to normal working state and the temperature setting is completed. The heating start indicator light is on.TI:pressSETKey to enter parametersTIThe settings,TIRepresents a timer, with units ranging from 0 to 999 minutes.0Indicates that the timed mode is turned off, otherwise when the instrument is workingTIAfter a few minutes, enter the stop state and stop the output of the load terminal. All parameters have been set, pressSETKey, save parameters and return to normal working state.

The main products are:
1. Biochemical, light, constant temperature and humidity incubator;
2. Electronic spirometer;
3. Water bath constant temperature oscillator, gas bath constant temperature oscillator, full temperature oscillation incubator;
4. Electronic constant temperature water bath, three purpose constant temperature water tank;
5. Electric centrifuge;
6. Constant temperature magnetic heating stirrer;
7. DC digital constant speed electric mixer;
8. Multi purpose oscillator for speed regulation;
9. Quartz sub boiling still;
10. Analysis, epidemic prevention, and environmental protection instruments:
Carbon monoxide analyzer, carbon dioxide analyzer, digital sound level meter, radon detector, polarograph
Mercury analyzer, formaldehyde analyzer, digital illuminance meter, digital acidity meter, digital temperature meterHygrometer, etc;