D270-1/2/3/4 series wet sponge pinhole detector

The D270 series of the company utilizes wet sponge testing technology and is designed to meet the new standard of wet sponge detectors - high-quality, low-voltage detectors. The D270-1/2/3/4 series wet sponge pinhole detector is used to measure defects such as pinholes in insulation coatings below 500 microns on conductive substrates.

Installed and deployed during supply, ready for immediate use
Automatic voltage calibration and sensitivity check
Low battery indicator
D270-1/2/3/4 series wet sponge pinhole detector visible signal and audio alarm
Integrated and separated rod functions
The accessories of the D270-1/2/3/4 series wet sponge pinhole detector series are optional to meet all your pinhole detection needs
Three models, single, dual, and triple output voltages
Easy to install and unload signal line
Large standard sponge
There is a testing toolbox with a series of attachments to choose from

2、 Technical parameters of D270-1/2/3/4 series wet sponge pinhole detector:

measurement range	9V	300μm
	67.5V	500μm
	90V	500μm
sensitivity	9V	90KΩ±5%
	67.5V	125KΩ±5%
	90V	400KΩ±5%
Voltage * * degrees	±5%
weight	610g
battery	Three 7th batteries
battery life	9V	200 hours of continuous use
	67.5V	100 hours of continuous use
	90V	80 hours of continuous use
Packing List	D270 host, standard assembly rod (flat sponge), 4-meter cable, three No. 7 battery cells, and instruction manual

measurement range 9V 300 microns (12mil) 67.5V 500 microns (20mils) 90V 500 microns (20mils) sensitivity 9V 90 kohm ±5% 67.5V 125 kohm ±5% 90V 400 kohm ±5% Voltage * * degrees ±5% size Rodless device 210x42x37mm (8.3x1.7x1.5″) Standard rod assembly With sponge, length 175mm (6.9 inches) Flat sponge size (approximately) 150x60x25mm (6x2.4x1″) Weight - including rod assembly, cable, battery 610g (21oz) battery Three 1.5V AA batteries (nickel hydrogen rechargeable batteries can also be used, but the battery life is reduced to 75%) Battery life (near value) 9V Setting 9V for 200 hours, continuous use 67.5V Setting 100 hours of continuous use 90V Setting 80 hours of continuous use Packing List Jig 270 instrument, standard assembly rod (flat sponge), 4 m (157 ") cable, 3 xAA battery, and instruction manual model name Part Number Elcometer 270/1 Jig 270 Pinhole Detector 9V D270----1 Elcometer 270/2 Jig 270 Pinhole Detector 67.5V D270----2 Elcometer 270/3 Jig 270 Pinhole Detector 9V, 90V D270----3 Elcometer 270/4 Jig 270 Pinhole Detector 9V, 67.5V, 90V D270----4

Elcometer270

Meets the following standards:
ASTM 3894.2	ASTM D 5162-A
ASTM G6	ASTM G62-A
BS 7793-2	ISO 8289 A
ISO 14654	NACE RP 0188
NACE SP 0188	NACE TM0384

measurement range	9V	300μm
	67.5V	500μm
	90V	500μm
sensitivity	9V	90KΩ±5%
	67.5V	125KΩ±5%
	90V	400KΩ±5%
Voltage * * degrees	±5%
weight	610g
battery	Three 7th batteries
battery life	9V	200 hours of continuous use
	67.5V	100 hours of continuous use
	90V	80 hours of continuous use
Packing List	D270 host, standard assembly rod (flat sponge), 4-meter cable, three No. 7 battery cells, and instruction manual

measurement range	9V	300μm
	67.5V	500μm
	90V	500μm
sensitivity	9V	90KΩ±5%
	67.5V	125KΩ±5%
	90V	400KΩ±5%
Voltage * * degrees	±5%
weight	610g
battery	Three 7th batteries
battery life	9V	200 hours of continuous use
	67.5V	100 hours of continuous use
	90V	80 hours of continuous use
Packing List	D270 host, standard assembly rod (flat sponge), 4-meter cable, three No. 7 battery cells, and instruction manual