SHZ-82 customized constant temperature shakerIt is a biochemical instrument that combines a temperature controlled constant temperature gas bath and an oscillator. It is mainly suitable for the oscillation cultivation of various liquid and solid compounds such as biology, biochemistry, cells, and bacterial strains in scientific research departments such as universities, medical institutions, petrochemicals, health and epidemic prevention, and environmental monitoring.

SHZ-82 customized constant temperature shakerTechnical performance:

1、 Power supply: 220V 50Hz

2、 Heating power: 450w

3、 Timing range: 0-999 minutes (or normally open)

4、 Oscillation frequency: starting -260 revolutions per minute, adjustable

5、 Oscillation amplitude: 26mm

6、 Constant temperature range: room temperature -60 ℃

7、 Oscillatory methods: reciprocating, swirling, and dual function (to be selected during procurement)

8： Temperature control accuracy: 1 ℃ Nine: Capacity: 2000ml Triangular beakers * 9 pieces

Special reminder: Add 'A' after the model to indicate temperature Speed dual digital display

SHZ-82Notice before use

1. Please read this manual carefully before use.

2. The working surface of the machine should not be excessively smooth (such as tiles, etc.).

3. The electrical rated parameters of the socket provided by the user should not be less than the electrical rated parameters of the machine, and there should be good grounding measures.

4. The whole machine is strictly prohibited from being used in an environment with direct sunlight.

5. The speed control should start slowly from low speed to high speed.

6. The machine may experience some displacement during high-speed oscillation, so it should be monitored by someone during use.

Instructions for using a large constant temperature shaker: 1. Install the test bottle and maintain balance. If it is a dual-purpose model, set the oscillation mode. (See zui for detailed settings) 2. Connect the power supply and set the timer time according to the surface scale of the machine. If you need to work for a long time, adjust the timer to the "normally open" position. 3. Turn on the power switch and set the constant temperature: (1) Place the control small switch in the "setting" section. At this time, the temperature displayed on the screen is the set temperature. Adjust the knob to set it to the temperature you need for work. (The working temperature you set should be higher than the ambient temperature. At this time, the machine starts heating and the yellow indicator light is on, otherwise the machine will not work.) (2) Place the control small switch in the "measurement" end. At this time, the temperature displayed on the screen is the actual temperature of the air inside the test box. As the temperature inside the box changes, the displayed number will also change accordingly. (3) When heated to. When the temperature you require is reached, the heating will automatically stop and the green indicator light will turn on; When the heat inside the test chamber dissipates below the temperature you set, a new round of heating will begin. 4. Turn on the oscillation device: (1) Turn on the oscillation switch on the control panel, and the indicator light will turn on. (2) Adjust the oscillation speed knob to the desired oscillation frequency. 5. Cut off the power after work, and set the speed control knob and temperature control knob to the lowest point.

Product related keywords: Constant temperature oscillator, Constant temperature shaker, Air bath oscillator

SHZ-82