Anhui Shengjie Intelligent Technology Co., Ltd
Home>Products>Cooling and humidification - humidifier (wet curtain+fan)
Product Groups
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13182941319
  • Address
    No. 18, Donghu Mountain Villa, Tianzhushan Road, Xinzhan District, Hefei City
Contact Now
Cooling and humidification - humidifier (wet curtain+fan)
1、 The best solution for ventilation and cooling: In hot weather, due to heat conduction, heat radiation, and the indoor temperature without cooling m
Product details
Cooling and humidification - humidifier (wet curtain+fan)

1、 The best solution for ventilation and cooling:
In hot weather, due to heat conduction, heat radiation, and the fact that indoor temperatures without cooling measures are higher than the outside temperature,homepoultryUnable to moveProceeding normally. Therefore, taking effective cooling measures is the only way to improve productivity, efficiency, and stability. Practice has proven that using a "wet curtain+fan" cooling device is currently the most economical and effective cooling measure for factory buildings.
2、 Wet curtain+Working principle of fan cooling system:
The poultry house cooling system - fan+wet curtain adopts the principle of negative pressure suction, which can not only ventilate and exchange air but also achieve the purpose of cooling. No matter how hot the poultry house is: above 32 degrees or 45 degrees, or with a lot of ammonia, water vapor, or poor ventilation, it is very hot and humid. Equipping a fan with a wet curtain can keep your company's factory operating in a comfortable environment between 25 degrees and 30 degrees. The simultaneous operating cost is only one tenth of that of air conditioning
3、 Working principle of wet curtain:
Evaporation cooling is a natural phenomenon. Just as the wind blowing over the sea causes water to evaporate, resulting in a decrease in air quality, in order to artificially reproduce this physical process in workshops and greenhouses. You must have a surface that can vaporize water, a water supply system that can keep the surface moist, and control measures that allow air to pass through the surface and ensure the effective operation of the entire system. The cooling process of the wet curtain cooling system is completed within its core Olympic bid paper pad. There is a thin layer of water film on the surface of the corrugated fiber paper. When the outdoor hot and dry air is sucked through the paper pad by the fan, the water on the water film absorbs the heat in the air and evaporates into water vapor. In this way, the processed cool and humid air enters the room. This natural process is like the wind blowing over the water. The temperature at which a wet curtain can cool down depends on the dry wet bulb temperature of the air and the efficiency of the wet curtain at this time, and the cooling value is the product of the two. The cooling efficiency of a stable running wet curtain is usually constant. It can be seen that the hotter the weather, the better the cooling effect of the wet curtain. The heat source of the greenhouse comes from heat conduction and radiation. The heat load generated by heat conduction and radiation depends on weather conditions, greenhouse shading treatment, etc. All the heat that causes the greenhouse temperature to rise must be eliminated through negative pressure ventilation.
4、 Characteristics of wet curtain paper:
1. This product is made of special paper honeycomb structure material, with wave heights of 5mm and 7mm, and staggered waves of 45 ° X45 °. Adopting a new generation of polymer materials and spatial cross-linking technology, it has high strength, high water absorption, long lifespan, and resistance to mold.
2. This product has a higher evaporation rate than the surface and a cooling efficiency of over 80%.
3. This product does not contain surfactants, naturally absorbs water, has a fast diffusion rate, and has long-lasting effectiveness. A drop of water can diffuse in 4-5 seconds, far exceeding the performance indicators of the same industry in China. Natural water absorption height of 60-70mm/5 minutes; At 200mm/1.5, it fully meets the international industry standards.
4. This product does not contain chemicals such as phenol that can easily cause skin allergies. When installed and used, it is non-toxic and harmless to the human body, safe, cost-effective, and practical.
5Excellent performance of the "wet curtain+fan" cooling system
1EfficientIn the southern region, the cooling of the unit can generally reach 4-13 degrees, and in hot and dry areas, the cooling can reach 4-15 degrees, and the cooling is rapid.
2Energy savingLow power consumption during operation, with one set of machines consuming only 0.3 kWh of electricity per hour,
3Environmental ProtectionNo compressor, no refrigerant, no pollution, low noise.
4. HealthContinuously providing fresh and clean air to increase the oxygen content in the air.
5Save moneyInstalling wet curtains and fans in the same area is 2/5 of the total investment in central air conditioning.
6. Simple and convenientEasy to install, minimal maintenance, easy to operate, no need for professional maintenance.
6、 Wet curtain function:
1. Promoting air circulation can prevent the occurrence of epidemics.
2. Can be humidified and disinfected.
3. Reduce indoor humidity by 5-10 degrees.
4. Poultry meat can have a more delicious taste.
7、 Precautions for the use and maintenance of wet curtains
1. System usage
1) Water volume control
The water supply should ensure that the wet curtain is evenly soaked, with fine water flowing down along the ripples of the wet curtain. The water volume can be controlled by adjusting the water supply valve.
2) Water quality control
Keep the water source clean, with a pH between 6-9 and a conductivity of less than 1000 ohms. Regularly clean the water tank, circulating water system, etc. to ensure the cleanliness of the water supply system. To maintain good water quality (usually once a week), 3-5 ppm chlorine or bromine can be added to the water for short-term treatment to prevent the growth of algae or other microorganisms on the wet curtain surface. The concentration during continuous processing is 1ppm.
3) Water leakage treatment
Water droplets splash away from the wet curtain. Check if the water supply is too large: whether there are damaged wet curtains, broken edges or "flying edges".
There is water leakage at the joint. After stopping the water supply, apply silicone gel.
4) Wet curtain paper pad with uneven dryness and wetness
Adjust the water supply valve to control the water flow or replace the high-power water pump or large-diameter water supply pipe. Timely flush the water tank, water pump inlet, filter, spray supply pipe, etc., and remove dirt from the water supply circulation system.
2、 Wet curtain maintenance
1. Daily maintenance
Stop the fan 30 minutes after the water pump stops, ensuring that the dry and wet curtains are thoroughly dried once a day. After the system stops running, check if the accumulated water in the sink is drained to avoid the bottom of the wet curtain being immersed in water for a long time.
2. Wet curtain cleaning
Remove scale and algae from the surface of the wet curtain. After thoroughly drying the wet curtain, use a soft bristled brush to gently brush up and down, avoiding horizontal brushing. (You can first brush a part to check if the wet curtain can withstand brushing.) Then only start the water supply system to flush the scale and algae on the surface of the wet curtain. (Avoid washing the wet curtain with steam or high-pressure water)
3. Rat pest control
In seasons when wet curtains are not used, rodent control nets can be installed or rodenticides can be sprayed at the bottom of the wet curtains.
8、 Having international advanced standardsSJFD-125EType fan(High end model)
The outer frame adopts advanced automatic processing technology with extremely high precision, and the material is made of special thick galvanized layer galvanized sheet.
High strength aluminum alloy wheels made of aviation aluminum magnesium alloy, lightweight, high strength, and good toughness.
New twisted stamping forming (aluminum plate, stainless steel optional) fan blade, reasonable blade angle, can achieve maximum air flow, minimum noise, long service life without deformation or fracture, extremely high safety.
◆ Adopting original imported bearings from France, with high strength, no noise, and long-lasting durability. The louvers are made of galvanized sheet metal and stamped as a whole, which can resist external damage to the louvers without deformation or detachment.
The louver opening adopts a unique push open close mechanism. When the fan is turned on or off, the louver automatically opens and closes completely and tightly without any noise, solving the problem of the heavy hammer window opening mechanism preventing the louver from fully opening when there are impurities.
High performance 380V three proof dedicated motor. The latest designed belt automatic adjuster does not require manual adjustment during the belt's lifespan.
Equipped with a motor hole wind deflector to prevent air loss and increase air collection effect.
◆ Adopting double support (E-type) belt transmission, (E-type belt transmission, Japanese RB type belt, wear-resistant, long service life)
The rear safety net and its convenient disassembly method make it easier for users to maintain the fan.
The high-precision microcomputer assisted manufacturing and testing system maximizes the efficiency of the fan, with seven strict quality inspection levels: air volume detection, noise detection, vibration detection, transmission concentricity performance detection, fan blade speed detection, motor current detection, and overall efficiency detection.
In addition, our company has developed stainless steel fan components such as frames, louvers, and blades made of stainless steel materials, which can be used in harsh environments with humid and corrosive gases. This machine is beautiful and practical.
name
model
Blade diameter
mm
Fan blade speed
r/min
rated voltage
v
Motor speed r/min
frequency
Hz
input power
kw
air volume
m3/h
noise
db
fan
SJFD-125E
1270
438
380
1400
50
1.1
43800
≤64
fan
SJFD-100E
1000
438
380
1400
50
0.75
35000
≤64
Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!