Beckman Coulter Air Particle Continuous Monitoring (FMS) System
MET ONEContinuous monitoring system for air particlesIt is a scalable online particle monitoring solution. Communication based on an open architecture can be easily integrated with your system. Our complete set of remote and portable air particle counters have full ISO 21501 compliance and are equipped with data management software that complies with the 21 CFR Part 11 standard.

Product Description:

MET ONE 3400 portable air particle counter
-Sequential sampling system
A low-cost on-site * * * solution can be deployed using the MET ONE 3432 sequential sampling system. A single MET ONE 3400 series air particle counter can sequentially sample up to 32 positions.

-Hot swappable battery - ensures long-term continuous operation of the instrument
Using hot swappable batteries, the instrument will not stop monitoring whether it is charging or disconnecting, counting to zero, or using backup power

-The testing wizard can make it easier for you to ensure compliance when monitoring cleanrooms
Save time and eliminate errors while monitoring your cleanroom environment

-Flexible communication method - easy to set up and convenient for data transmission
The available wireless, Ethernet, and serial communication options can transfer data to the METONE data management system or the customer's existing software to reduce paperwork

-Intuitive user interface
Convenient configuration and replication of regions, locations, and operational parameters, saving running time. Simply copy the complete configuration to a USB drive to eliminate setup errors and save time. Sampling plans can also be deployed throughout the entire particle counter array!

-Multi level user login - ensuring compliance
Multi level user password protection to ensure data security and comply with the requirements of Part 11 of the 21 CFR regulations

-Reliability and accuracy in accordance with ISO 21501-4 standard
Specially designed to meet special particle counting requirements, the accuracy and reproducibility between instruments fully comply with the ISO21501-4 standard requirements.

MET ONE 6000 Remote Air Particle Counter
-Online reliability of particle counting
ISO21501 compatible built-in flow sensor for accuracy and reliability of CFR21 data

-Flexible and convenient, suitable for all remote air particle counter applications
Flexible for particle counting of 0.3 microns or 0.5 microns at flow rates of 0.1 cfm or 1.0 cfm

-Unparalleled quality and reliability
Using long-life laser diodes to ensure continuous monitoring

-Easy to integrate with any FMS system
Open architecture design that seamlessly communicates with your system
Multiple communication methods to choose from: pulse, Modbus serial port, Ethernet, wireless, and analog

-Can quickly troubleshoot and reduce downtime
The MET ONE 6000 remote air particle counter can be used to diagnose flow, sensor, or communication failures, allowing for early detection of hardware issues
Visual counting alarms and alerts can be triggered through the built-in status light

-Easy to install - cost saving
The MET ONE 6000 remote air particle counter integrates multi parameter measurement, reducing initial installation costs. The optional relative humidity and temperature probes integrate RH/T data and particle counting data into the same data stream

MET ONE 6000P pump type remote air particle counter
-Easy to install and reduce costs
The built-in pump can be installed anywhere without the need for high cost vacuum pumps

-Online reliability of particle counting
ISO21501 compatible built-in flow sensor for accuracy and reliability of CFR21 data

-Flexible and convenient, suitable for all remote air particle counter applications
Flexible for particle counting of 0.3 microns or 0.5 microns at flow rates of 0.1 cfm or 1.0 cfm

-Quality and reliability
Using long-life laser diodes to ensure continuous monitoring

-Easy to integrate with any FMS system
Open architecture design that seamlessly communicates with your system
Multiple communication methods to choose from: pulse, Modbus serial port, Ethernet, wireless, and analog

MET ONE 7000 Remote Air Particle Counter
-Durable and sturdy design, suitable for cleanroom applications
Rinse stainless steel VHP, chemical resistant NEMA 4X enclosure

-Online reliability of particle counting
ISO21501 compatible built-in flow sensor for accuracy and reliability of CFR21 data

-Flexible and convenient, suitable for all remote air particle counter applications
Flexible for particle counting of 0.3 microns or 0.5 microns at flow rates of 0.1 cfm or 1.0 cfm

-Quality and reliability
Using long-life laser diodes to ensure continuous monitoring

-Easy to integrate with any FMS system
Open architecture design that seamlessly communicates with your system
Multiple communication methods to choose from: pulse, Modbus serial port, Ethernet, wireless, and analog

Application areas:

If you want to learn more about this product or need professional personnel to answer your professional questions about product performance, after-sales service, etc., please join us immediately.