Liaoning Kono and its comprehensive water treatment system

❀ Product Introduction

The multifunctional full process water processor is designed to address the four common issues in various circulating water systems:The comprehensive processor developed for corrosion, scaling, bacterial and algal growth, and numerous impurities has replaced the traditional processing method with a single device, which requires multiple devices to complete the processing. It applies high-tech differential shielding effect and multi-point array combination. Cleverly solving the major problem of mutual interference and constraint between various spectra and corona effect fields, it has comprehensive optimization of water quality treatment, anti scaling, anti-corrosion, sterilization, algae killing, and ultra clean filtration functions. It has an electromechanical integration design, pure physical treatment, no need for chemical agents, low resistance, and high flow rate. Moreover, it has extremely low operating costs, simple operation, and easy maintenance, making it the best choice for various water systems.

❀ Technical parameters

① Control corrosion rate<0.01mm/Year, filtration efficiency>75%-98%Efficiency of scale prevention and removal95%Sterilization and algae removal95%

② Pressure drop:<0.03-0.06Mpa

③ Working voltage: AC195V-245V

④ Safe insulation voltage:5000V

⑤ Power consumption:<120W-600W＞

⑥ Work environment requirements: Temperature25℃-50℃ Relative humidity ＜95%rh

⑦ Mean time between failures: not less than50000hour

⑧ Applicable media: surface water, groundwater, and various circulating water

❀ Installation diagram

❀ Equipment operation

① Pollutant discharge rate: When the new system is first used, every8Hourly backwash2-3Next time. After normal operation, when the pressure difference between the inlet and outlet reaches0.04-0.08MpaPerform backwashing when (or according to the system set pressure difference).

② Backwash: (see installation diagram) Open the main valve and drain valve. Close the inlet valve of the equipment and finally cut off220VPower supply, water flow backwash washing filter body, can revive the filter body. The backwash time depends on the water quality, generally10-30In seconds.

③ For heavily polluted systems, a mixture of air and water should be used to backwash and revive the filter body. Import pressure is less than0.25Mpa.

❀ Installation precautions

① The distance between the equipment outline and the bypass or structure should be greater than500mm.

② Do not turn on the device for a long time without water.

③ The installation form of the equipment should be a bypass installation to meet the needs of maintaining the equipment and repeatedly flushing and reviving the filter body without stopping the machine.

④ The multifunctional full process water processor shall not be installed in the negative pressure area in front of the water pump.

❀ Application scope

mainly used-Central air conditioning: chiller unit, refrigeration unit; Cooling water and chilled circulating water system. Heating system; In the heating and hot water circulation system. Civil, industrial, catering, geothermal water systems, etc.

Note:KN-QCThe model has the function of a full process water processor and can achieve automatic detection and control, as well as automatic switching and automatic discharge under large caliber and high load conditions. It is a fully automatic full process water processor. Due to the installation of pressure sensors, conductivity sensors, andPLCProgrammable controller(Optional)The continuous operation and automatic backwashing of water treatment equipment have improved the overall automation level of the equipment.


<