VIP member
Composite cyclic salt spray test chamber
Composite cyclic salt spray test chamber
Product details
Composite cyclic salt spray test chamber
Product Introduction
Composite cyclic salt spray test chamberIt is aimed at surface treatment of various materials, including coatings, electroplating, inorganic and organic films, anodizing, anti rust oil and other anti-corrosion treatments, to test the corrosion resistance of their products.
Control method
1.KB-Y-60Composite cyclic salt spray test chamberThe Bernoulli principle is used to extract saline water and then atomize it uniformly, without any obstruction or crystallization, ensuring the standard of continuous testing.
2. Nozzle: made of special glass nozzle, which can adjust the size of spray volume and spray angle.
3. spray volume: spray tower is set in the middle of the laboratory to make the fog fall evenly, and can be adjusted to 1~2 ml 80 cm2/hr (16 hour average volume)
Technical Specifications
|
studio dimensions |
600×400×450mm （L×W×H） |
|
analysisprecision |
± 0.1℃ |
|
controlprecision |
± 1.0℃ |
|
distributionessencedegree |
± 2.0℃ |
|
Test Method |
1.Salt water spray test: NSS, ACSS
(1) Laboratory: 35℃±1℃
(2) Saturated air tank: 47℃±1℃
2.Acetate salt spray test:NSS，ACSS
（1）Laboratory:50℃±1℃
（2）Saturated air tank:63℃±1℃
Add acetic acid with ice to adjust the pH value of the test solution to 3.1~3.3
3. Copper speed test: CASS
(1) Laboratory: 58 ℃±1℃
(2) Saturated air tank: 65 ℃±1℃
Add acetic acid with ice to adjust the pH value of the test solution to 3.1~3.3, and mix with 0.02~0.025% copper chloride |
product structure
|
laboratory |
adoptP.V.CPolyvinyl chloride board, thickness5Mm, heat-resistant up to 80℃ |
|
sealing cover |
Made of acrylic impact resistant board, thick6Mm, transparent sealing cover, real-time observation of the condition of the tested product |
|
pressure tank |
adoptSUS#304Stainless steel high-pressure resistant bucket with excellent insulation effect |
|
heating system |
Using imported stainless steel finned heat pipe U-Type electric heater to heat the air |
|
shelf |
Using a planar indexing frame, the angle can be adjusted arbitrarily, and the four sides are completely consistent in terms of falling and receiving fog, with a large number of test pieces placed. |
|
Control Panel |
◆ Laboratory temperature controller0-99.9℃, LCD digital display hasPIDAutomatic calculation, control error ±0.3℃
◆ Saturated air tank temperature controller0-99.9℃, LCD digital display hasPIDAutomatic calculation, control error ±0.3℃
◆ Heating tank liquid expansion safety temperature controller0-120℃
◆ Saturated air tank liquid expansion safety temperature controller0-120℃
◆ Digital display time controller0.1s-9990hr
◆ Accumulator0-9990hr
◆ Swing board illuminated buckle switch, capable of continuous buckle pressing20000time |
protective device
1Automatic power-off device when the water level is low
2Automatic power-off device when overheating occurs
3Equipped with safety warning light device
main controller
Communication contactor: Taiwan
Thermal relay: Taiwan
Communication relay: OMRON,
Time Relay: Taiwan
Controller: Taiwan
Overtemperature protector: Taiwan
Main power switch: Taiwan
Solid state relay: Taiwan
Button switch: Taiwan
Dry burn protector: Italy
Additional notes
| Voltage used: |
1.power supply:AC1￠3W 220V 50/60HZ※ Voltage fluctuation allowable value:Freeze voltage ±10% 2. High load capacity:3.0KVA 3. High working current:15A |
| use water want Request: | ROReverse osmosis pure water or distilled water |
| Usage environment: |
Allow use in an environment of 0~30 ℃ Performance guarantee environment: 5~25 ℃ The installation ground should not have obvious inclination No other items can be placed within 60CM around the instrument |
| Accessories: |
1．LType storage rack 4 pieces 2Standard measuring cylinder 1branch 3Temperature indicator needle 2branch 4．OType storage rack 6branch 5. Collector 80㎝ 1branch 6Glass nozzle 1branch(Please replace regularly) 7. Sodium chloride test drug（NACL）500gram 2 bottles 8. One 2.5m long low resistance rubber cable for the power cord |
| Items excluded from valuation: |
1. Preparation project for setting up the venue 2. Input side electrical equipment 3. Natural drainage piping engineering 4. Drainage outlet equipment 5. Gas source 6. Mist exhaust port |
| Provide documents: |
1. Provide a copy of the order specification sheet when placing an order 2. Provide a copy of the user manual upon delivery 3. Provide a copy of the product warranty card upon delivery |
Common questions and answers about salt spray test chamber:
Composite cyclic salt spray test chamberWhat components are made up of？
A normal salt spray test chamber consists of 8 parts, namely: exposure chamber, humidity and temperature control, spray device, air saturator, salt spray collection device, air dryer, exhaust system, and drainage system. None of the above 8 parts is necessary. Other parts can be added according to the actual needs of customers.
Composite cyclic salt spray test chamberWhat are the testing standards for?
The salt spray test standard is a clear and specific specification for the conditions of the salt spray test, such as temperature, humidity, concentration of sodium chloride solution, and pH value. In addition, it also puts forward technical requirements for the performance of the salt spray test chamber.
Composite cyclic salt spray test chamberHow much does it cost per unit?
We are a manufacturer of salt spray test chambers, and there are no intermediaries to make a profit. The price of salt spray test chambers is not fixed, and it will vary depending on the function, quantity, material, and whether it is customized. For a detailed quotation plan, please call the phone number in the upper right corner of the website.
Composite cyclic salt spray test chamberWhich one is good?
The salt spray test chamber is one of the essential equipment for conducting salt spray tests on products. There are many manufacturers of salt spray test chambers now, but the quality varies greatly. When choosing a salt spray test chamber, it is recommended to look for a company with high brand awareness, long establishment years, and non-standard customization capabilities. The product quality is guaranteed, and the after-sales service is relatively complete.
Guangdong Kebao Experimental Equipment Co., Ltd. has been focusing on constant temperature and humidity test chambers, constant temperature and humidity machines, cold and hot impact test chambers, high and low temperature impact test chambers for many yearssalt spray test chamberEquipment such as UV aging test chamber and sand and dust test chamber. Welcome to call for consultation. Consultation hotline:
Tags: Salt Spray Test Chamber
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-