Combination assembled water tank

Common stainless steel water tanks include stainless steel fire water tanks, square combination water tanks, vertical circular water tanks, and horizontal circular water tanks. Using stainless steel plates such as SUS304, SUS316L, SUS444, etc., stamped and formed. Generally stamped into three sizes, namely 1x1 meters, 1x0.5 meters, and 0.5x0.5 meters, and welded with tungsten inert gas arc around, it has the characteristics of high strength, light weight, low cost, environmental protection and hygiene. The manufacturing standard is the national building standard 12s101 design atlas.

1. Welding seam of water supply tank, material: The following is prepared according to the technical parameters of stamping stainless steel water tank. The material of water tank accessories is made of ordinary carbon steel plate and profiled steel, welded with LB304NI8.0 welding rod, and its quality should comply with the current standards "Carbon Structural Steel" and "Carbon Steel Welding Rod".

The splicing of LB304 stainless steel plates on the top, walls, and bottom of the box adopts butt welding (I-type welding for the top plate, V-type welding for the bottom plate and side walls), and other welding is fillet welding. There is no cross crossing phenomenon between the welds, and they must not overlap with the reinforcing ribs. The welding machine is the LB-2-300 stainless steel water tank special welding machine, which has the functions of electric welding and argon welding.

2. Full water experiment

After the water tank is made, it should be completely filled with water. After 2-3 hours, use a lead hammer weighing 0.5-1.5 kilograms to lightly tap along the weld seam about 150 millimeters on both sides. If there is no water leakage, it is considered qualified; If any leakage is found, it must be re welded and tested again.

Stainless steel water tanks are suitable for large hotels, restaurants, offices, apartments, research and teaching buildings, as well as places with high water quality requirements such as food processing, medical and health care, and electronics industry. (Note: Those with high chloride ion content in water should use with caution)

1. Stainless steel water tanks are generally made of SUS304 stainless steel plates, which have stable physical and chemical properties, no pollution to water quality, and ensure clean and hygienic water quality;

2. Stainless steel water tank is stamped and formed, with high strength, light weight, clean appearance, and elegant beauty;

3. The water tank plate is generally made of high nickel 8.0 or higher 3042B plate, with a smooth and beautiful surface that is easy to clean;

4. Due to the dense oxide layer on the surface, it has superior corrosion resistance and good sealing performance;

5. High impact resistance and strong seismic performance;

6. Compared to other types of water tanks.

High quality and excellent material selection: High quality food grade stainless steel SUS304 greatly extends the service life of the radiator and can effectively prevent secondary pollution of water quality.

Unique and reasonable structure: The high-strength stamping plate and uniformly distributed stainless steel tension bars inside the box make the pressure on the box uniform and reasonable.

Convenient and fast construction: Standard stamping plates of 1000 × 1000, 1000 × 500, and 500 × 500mm can be assembled and welded on site without the need for lifting equipment.

Lightweight and aesthetically pleasing box: High quality stamping technology ensures maximum pressure resistance while reducing material thickness, meeting the aesthetic and practical requirements of the box.

Imported stainless steel SUS304 stainless steel water tank special plate is selected, which meets the national OCr18Ni19 hygiene inspection standard, does not rust, grow moss, leak water, permanently maintains cleanliness and hygiene, is safe and stable, has a service life of more than 15 times that of concrete water tanks, and can be used for storage of cold water, purified water, boiled water, chemicals, solvents, etc.

Usage Function

Fully enclosed, with functions of water inlet, outlet, overflow, and discharge, easy to install. You only need to place the water tank on the roof and connect the water pipe to use it, making maintenance very convenient. Stainless steel water tanks are widely used in high-rise apartments, factories, schools, hospitals, villas, and various other fields.

precautions

Stainless steel water tanks are mainly used as equipment for storing domestic water, so it is generally recommended to only store domestic water. Other solvents can also be used, but liquids with high alkaline and acidic content, such as hydrochloric acid and sulfuric acid, should not be stored. Some people also habitually place some debris on the top of the water tank, but these are not good, and children should not be allowed to tap or draw outside the water tank. Some maintenance personnel also need to observe the water tank regularly and promptly report any problems to the manufacturer. Also, do not frequently open the lid of the water tank, as it can pollute the water quality. Do not think that stainless steel water tanks will not last forever and will not pollute the water quality, so do not clean them. This is also not acceptable. It is still necessary to clean them regularly every year to eliminate toxins.

instructions

1. Stainless steel water tanks, as secondary equipment for storing domestic water, can only hold domestic water (fire water) and cannot hold hydrochloric acid, sulfuric acid, or liquids with high acidic or alkaline content.

2. During the use of the water tank, do not place other bulky equipment on the top of the tank, and do not use hard objects to randomly tap or draw the water tank layout and fittings. If there are any problems, notify the manufacturer's technical maintenance personnel and welding personnel in advance. It is required that they are professional personnel specializing in argon arc welding work, and the water should be drained during maintenance.

3. Maintenance personnel regularly observe the usage of main components and accessories inside and outside the water tank every month, and promptly report any problems to the manufacturer.

4. Do not open the water tank inlet cover casually to prevent secondary pollution of water quality. The water tank should be cleaned and disinfected 1-2 times a year.

Product Description of Prefabricated Stainless Steel Rib Welded Water Tank

Prefabricated stainless steel ribbed welded water tank refers to a new type of water tank in which the container body is stamped with stainless steel plates with a certain concave convex shape to greatly improve its rigidity, and then welded into a thin shell box. It is currently the most advanced, beautiful, and suitable water tank in China. Its structure is exquisite, reasonable, advanced, and material saving, and can be widely used in civil and industrial buildings. It is an ideal equipment for storing and regulating water. It has a reasonable structural design, fully welded on-site combination, high strength, good sealing, prevents secondary pollution of water quality, never leaks, light weight, is half of ordinary steel plate water tanks, reasonable price, clean, bright, beautiful, practical and other characteristics.