Elevating electric transfer windows and ordinary transfer windows are purification equipment installed on the partition walls between clean areas and non clean areas with different levels of tightening, used to transfer items to each other. According to the production process requirements, air shower transfer windows and ordinary transfer windows can be made. The air shower transfer window can generate clean high-speed airflow to spray items during transfer, removing dust from the items and preventing contamination of the clean room.

Application scope of lifting electric transmission window:

Lift type electric transfer windows are widely used in CSSD center supply rooms, sterile distribution rooms, operating rooms, pharmaceutical factories, food factories, spray painting workshops, research rooms, purification rooms, and other enclosed areas with high indoor and outdoor environmental requirements for the transfer of small items in the same purification level and pressure difference requirements, reducing the number of door openings and pollution levels. The lifting electric transfer window, which uses a motor for lifting, can effectively prevent hand clamping and is mainly used for transferring sterile items, making it a better transfer window for hospitals.

Operating instructions for the lifting electric transmission window:

1. Equipped with anti pinch function;

2. Equipped with electronic button switch control;

3. Interlocking function;

4. Built in sterilization ultraviolet lamp;

5. Built in intercom function, 3-second quick opening and closing, can effectively isolate bacteria and dust pollution in outdoor air. It only takes three seconds to rise or fall, making it convenient and fast to transfer items. Equipped with a user-friendly voice interaction system, when the interlock function completely isolates indoor and outdoor, indoor and outdoor staff can communicate normally through this function, truly achieving seamless communication between indoor and outdoor. There is a gap of about 1mm between the fixed window and the movable window. When both windows A and B are closed, users can freely open window A or B, but cannot open window AB at the same time. When one of window A or B is already open, the other window is in a closed state, thus achieving complete indoor and outdoor separation.