The HD-LE series intelligent target flowmeter is a third-generation capacitive force induction flowmeter developed on the basis of traditional force sensors, with the development of new sensors and electronic technology. It has high sensitivity, accuracy, and a wide range of measurement. Target flowmeter, with its unique anti-interference and anti impurity performance, can not only replace the flow measurement problems that can be measured by conventional flow, but also has good adaptability in difficult flow measurement conditions such as high viscosity, dirty media, easy coagulation and blockage, high temperature, low temperature, and strong corrosion.

[Product Introduction of Target Flow Meter]
The HT-LE series target flowmeter adopts a new type of capacitive force sensor, which has high sensitivity, accuracy, no movable parts, and low pressure loss. Its unique characteristics of anti vibration, dirt resistance, and high sensitivity are particularly suitable for flow measurement difficulties such as high viscosity, dirty media, easy coagulation and blockage. It is widely used for flow measurement of flue gas, coke oven gas, blast furnace gas, generator gas, compressed air, heavy oil, residue oil, tar, asphalt, sewage and other media. Plug in structure, easy installation, maintenance free and cleaning free, especially suitable for large and square pipelines, widely used in fields such as petroleum, chemical, metallurgy, power, pharmaceuticals, environmental protection, food, etc.
● Wide range of applicable pipe diameters: Φ 10~Φ 2000 to larger;
● Wide applicable temperature range: -196 ° C~500 ° C;
Suitable for high/low pressure conditions: 0~42MPa;
Suitable for various media: gases, liquids (including high viscosity liquids, slurries), steam;
Suitable for low velocity media, it can measure a minimum flow velocity of 0.08m/s.

Target flowmeter product parameters
Product Name: Target Flow Meter
Caliber: DN15~DN3000mm to larger
Nominal pressure: 0.6-42MPa
Operating temperature: -20 to+300 ℃ (please contact the factory for higher temperatures)
Accuracy: ± 0.2 to ± 1.5% FS
Range ratio: 1:10
Shell: Carbon steel (lined with fluorine); stainless steel
Power supply method: Built in 3.6VDC lithium battery (usable for two years); External supply 24VDC
Output signal: 4-20mA two-wire system; Pulse 0-1000Hz; RS485
Protection level: IP65
Explosion proof mark: intrinsic safety type ExiallCT4; Explosion proof ExdllCT4
Header display: Accumulated traffic; Instantaneous flow rate; Full scale percentage; Fault self check
Connection method: Pipe flange type (DN15-300mm); Clamp type (DN15-300mm); Insertion type (DN100- DN3000mm to larger).

[Product Features of Target Flow Meter]
No movable parts, dirt resistant, easy to install and maintenance free
Multiple anti-corrosion and high/low temperature resistant materials (such as Hastelloy, titanium, etc.) can be selected
The whole machine is fully sealed without any dead corners or leakage points, and can withstand high pressure of 42MPa
● Low pressure loss, only about 1/2 △ P of the standard orifice plate
The sensor does not come into contact with the measured medium, there is no wear on the components, and it is safe and reliable to use
● Wide range of applicable media: able to accurately measure gas, liquid, and steam flow rates at various temperatures, and can measure two-phase flow
● There are multiple installation methods to choose from, such as online plug-in, with low installation costs
● With integrated temperature and pressure compensation, directly output quality or standard square
● It has optional small signal cutoff, non-linear correction, and selectable filtering time
Accurate measurement, with an accuracy of 0.2~1.5%
Good repeatability, generally 0.05-0.08%, fast measurement
The instrument is equipped with a self checking program, and the fault symptoms are clear at a glance
● Strong anti-interference and anti impurity ability
● Multiple output forms, capable of transmitting various parameters remotely
Strong vibration resistance, capable of measuring pulsating flow within a certain range

Typical Applications of Target Flowmeters
Gas class:
Gas, air, hydrogen, natural gas, nitrogen, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, etc
Liquid type:
Heavy oil, paraffin, asphalt, sulfuric acid, edible oil, residual oil, acetone, diesel, mine water, detergent, soy sauce, gasoline, silicone oil, syrup, solvent, perfume, sea water, aviation kerosene, soap ketone water, glucose, vegetable acid, salt water, paste, ink, coolant, glycol, mineral oil, liquid sugar, hydrochloric acid, automobile paint, resin, butter, vegetable oil, liquid oxygen, shampoo, toothpaste, gel, fuel, milk, bleach, conditioner, soda, additives, detergent, alkaline, ammonia, marine oil, chemical reagent, kerosene, glycerin, dye, water, nitric acid, high boiling point organic solution, lard, additives, alcohol, oil, ethylene, polypropylene, methylbenzene, etc