Circular pole tensile testerTECHNICAL INDEX
Accuracy ≤ 1% (FS), ≤ 0.5% (FS)
2. Force and displacement display, with the smallest unit being 0.01KN and 1mm
3. AC power supply~220V ± 15% (50Hz)
4. Automatic zeroing
5. Operating environment temperature: normal temperature
6. Use environment humidity of 40% -90% (no condensation)
7. Use without strong magnetic fields or noise sources around
No peak display
Measurement: Displacement measurement within 1800mm. (The smallest display is 1mm)
When the force display unit ① is ≤ 20KN, the reading is 0.01KN
② When ≤ 200KN, the reading is 0.1KN
Load display zeroing, displacement display zeroing, zeroing
The maximum display division number is 1999, and the measurement accuracy is better than 0.05% (excluding sensors)
Storage environment: Temperature:- 5℃～+45℃
Humidity: 40% to 90% (without condensation)
Volume: 290mm wide x 120mm high x 265mm deep (including bracket and largest size)
Standard configuration of pipe pile tester:
One display instrument with two windows and one power cord.
(1) One 20KN and one 200KN tension sensor, two M24 suspension rings, two M36 suspension rings, and one 5-meter 4-core shielded signal wire.
One 1800MM displacement sensor, one sensor bracket, and one 5-meter 3-core (2) shielded signal wire. One electronic stopwatch


Circular pole tensile testerIt is an instrument used for measuring the load characteristics and displacement changes of electric poles in tension, compression, and displacement. It has two digital LCD display windows, which respectively display the load force value and displacement value.