This device can crush sawdust, tree branches, rice husks, bamboo shavings, peanut peels, sunflower seed shells, furfural residue, wine residue, sugarcane bagasse, corn cobs, coconut shells, coffee shells, and crop straw from both the north and south. After high-temperature and high-pressure plasticization by a molding machine, they are molded into semi-finished products of machine-made charcoal, which are then carbonized in a carbonization furnace to produce finished charcoal.
Production characteristics:
1. No need to add any adhesives or harmful chemicals.
2. The humidity of the raw materials is within 8-12%.
3. Adopting advanced hot air flow drying system, the drying effect is excellent.
4. Carbonization equipment can transform semi-finished products into smokeless, odorless, and non-toxic clean charcoal through high temperature, purification, and smoke removal. It has professional technical support and is risk-free.
Application of Mechanized Charcoal:
In today's situation where the State Council explicitly prohibits the use of wood for charcoal burning, it is a waste renewable energy fuel with a higher heat generation than charcoal of the same type, higher than ordinary coal, smoke-free, odorless, non-toxic, clean and hygienic, and can be widely used for home heating. Barbecue food is in high demand in the international market. In industry, it can replace coal or heavy oil steam boilers and can also be used as a chemical raw material for deep processing of activated carbon and silicon carbide. Crystalline silicon, etc. It is an essential raw material for carbon disulfide factories, mosquito coils factories, explosives factories, copper processing factories, and foundries.
Appendix (1) General Performance Indicators of Mechanized Carbon
| moisture |
carbon content |
ash content |
calorific value |
burning time |
volatile matter |
Combustion humidity |
| 0.98% |
83.28% |
3.68% |
7.9 kcal/kg |
200 minutes/kg |
6.68% |
880 degrees |
Appendix (2) Cost Accounting and Economic Analysis of Artificial Carbon Tons
| serial number |
project |
unit |
quantity |
Unit Price (CNY) |
Amount (CNY) |
Remarks |
| 1 |
raw materials |
ton |
2.8 |
100.00 |
280.00 |
|
| 2 |
water |
ton |
0.1 |
2.00 |
0.20 |
|
| 3 |
electricity |
degree |
300 |
0.60 |
180.00 |
|
| 4 |
Depreciation of factory buildings |
yuan |
30000.00 |
6.00 |
6.00 |
Factory building 50m2Warehouse 40m2
10 years off
|
| 5 |
salary |
person |
5 |
20 |
100.00 |
|
| 6 |
Equipment depreciation |
yuan |
50000.00 |
16.00 |
16.00 |
Completed in 6 years |
| 7 |
tax |
yuan |
1 |
24.00 |
24.00 |
|
| 8 |
production cost |
ton |
1 |
|
606.20 |
|
| 9 |
profit |
ton |
1 |
|
|
Determined by sales price |
After analysis and demonstration by relevant experts and years of practical application, it has been proven that the machine made charcoal project has the characteristics of sufficient raw materials, low cost, advanced technology, maturity, stable equipment performance, and compliance with national industrial policies. The product has a wide range of uses, great market potential, easy sales, low investment, and quick results, so it is a practical and good project for entrepreneurship and wealth creation.
Charcoal machine series crusher
smash
The machine adopts a high carbon alloy diamond blade, a high-speed strong wind suction crushing system, stable performance, durability, good crushing effect, and is equipped with a power of 11KW.
production capacity
|
350KG/h |
Feed diameter
|
< Φ 30mm |
Crush the largest particle
|
Φ 10 X 20mm |
Equipped with motor
|
11KW |
Charcoal dryer series
The dryer adopts a hot air flow drying system, which has low power, low energy consumption, and fast drying. The drying output depends on the moisture content of the raw materials, and the power is 4km.
|
Drying ability
|
200kgH2O/h
|
|
Product granularity
|
Diameter<3mm, length<5mm
|
|
Motor power
|
4KW
|
|
Hot air temperature
|
180℃~250℃
|
Charcoal machine series rod making machine
Charcoal machine related accessories:
|
|
|
The bar making machine is designed and manufactured according to the essence of similar equipment at home and abroad. The whole machine is beautiful, thermostatically controlled, and key components are processed with imported materials. It has high strength, high toughness, durability, applicability, and high yield.
production capacity
|
> 100kg/h |
> 140kg/h |
Motor power
|
11KW |
11KW |
Electric heating power
|
4.5KW |
4.5KW |
Product dimensions
|
Φ50 X 15mm |
Φ55 X 15mm |
Charcoal machine series carbonization furnace
The carbonization furnace adopts high-tech purification technology and is made of special high-temperature resistant precious metal steel, which is sturdy and durable, does not deform or oxidize, has good insulation performance, is easy to operate, safe and reliable, and has no carbonization dead corners in the double tube chimney.
1. Dissolve 3m3 in the furnace, with a raw material char yield of 40-60% or higher and a finished product yield of over 95%.
2. Save labor and time, one person can operate several carbonization furnaces at the same time, with a power of 1.5km.
|
