Yongjia Quanda Pump and Valve Manufacturing Co., Ltd
Home>Products>Centrifugal pump for booster pipeline on the booster floor of the community
Centrifugal pump for booster pipeline on the booster floor of the community
Centrifugal pump for booster pipeline on the booster floor of the community
Product details

Product features:

1. The pump is a vertical structure with the same inlet and outlet diameters and located on the same centerline. It can be installed in pipelines like a valve, with a compact and beautiful appearance, small footprint, and low construction investment. If a protective cover is added, it can be used outdoors.
2. The impeller is directly installed on the extended shaft of the motor, with a short axial dimension and compact structure. The pump and motor bearings are reasonably configured, which can effectively balance the radial and axial loads generated by the pump operation, thereby ensuring the balance of the pump operation, low vibration, and low noise.
3. The shaft seal adopts mechanical seal or a combination of mechanical seals, using imported titanium alloy sealing rings, medium-sized high-temperature resistant mechanical seals, and hard alloy materials for wear-resistant seals, which can effectively prolong the service life of mechanical seals.
4. Easy installation and maintenance, no need to disassemble the piping system, just remove the pump coupling nut to extract all rotor components.
5. Pumps can be operated in series or parallel according to the requirements of flow rate and head.

6. Vertical and horizontal installation of pumps can be adopted according to the requirements of pipeline layout.
Centrifugal pump for booster pipeline on the booster floor of the communityMain purpose:
1ISG type vertical pipeline centrifugal pumpIt is used for transporting clean water and other liquids with physical and chemical properties similar to clean water. It is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water circulation pressurization and equipment matching. The operating temperature is T<80 ℃.
2IRG (GRG) type vertical hot water (high temperature) circulation pumpWidely applicable to: energy, metallurgy, chemical, textile, papermaking, as well as hotels, restaurants and other boiler high-temperature hot water pressurized circulation transportation and heating system circulation pumps, IRG type operating temperature T<120 ℃, GRG type operating temperature T<240 ℃.
3IHG vertical pipeline chemical pumpIt is a liquid that does not contain solid particles, is corrosive, and has a viscosity similar to water. It is suitable for industries such as petroleum, chemical, metallurgical, power, papermaking, food and pharmaceuticals, and synthetic fibers. The operating temperature ranges from -20 ℃ to 120 ℃.
4YG type vertical pipeline oil pumpFor transporting petroleum products such as gasoline, kerosene, diesel, etc., the temperature of the transported medium is -20 ℃ to+120 ℃.

Working conditions:
1. The suction pressure is ≤ 1.0MPa, or the maximum working pressure of the pump system is ≤ 1.6MPa, that is, the pump suction pressure+pump head is ≤ 1.6MPa. The static pressure test pressure of the pump is 2.5MPa. Please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6MPa, it should be separately stated when ordering, so that the overcurrent and connection parts of the pump can be made of cast steel materials during manufacturing.
2. Environmental temperature<40 ℃, relative humidity<95%.
3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than 0.2mm.
Note: If the medium used is with small particles, please specify when ordering so that the manufacturer can use wear-resistant mechanical seals.

Please provide as much as possible for ordering:1. Model2. Caliber3. Head (m)4. Traffic5. Motor power (KW)6. Speed (R/min)7. Voltage (V)8. Does the material come with accessories

Welcome to visit our website at Yongjia Quanda【www.quandabf.com】If you have any questions Our company specializes in the production of centrifugal pumps, sewage pumps and other products. You can call us at, and we will do our best to provide you with high-quality service.

Related products:

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!