Cement pole testerMain technical indicators: 1. Accuracy ≤ 1% (FS), ≤ 0.5% (FS)
2. Force and displacement display, with the smallest unit being 0.01KN and 1mm
3. AC power supply~220V ± 15% (50Hz)
4. Automatic zeroing
5. Operating environment temperature: normal temperature
6. Use environment humidity of 40% -90% (no condensation)
7. Use without strong magnetic fields or noise sources around
Measurement: Displacement measurement within 1200mm. (The smallest display is 1mm)
When the force display unit ① is ≤ 20KN, the reading is 0.01KN
② When ≤ 200KN, the reading is 0.1KN
Load display zeroing, displacement display zeroing, zeroing
The maximum display division number is 1999, and the measurement accuracy is better than 0.05% (excluding sensors)
Storage environment: Temperature: -5 ℃ to+45 ℃
Humidity: 40% to 90% (without condensation)
Volume: 290mm wide x 120mm high x 265mm deep (including bracket and largest size)
Cement pole testerStandard configuration:
One display instrument with two windows and one power cord.
One 200KN tension sensor, two M36 suspension rings, and one 5-meter 4-core shielded signal wire.
One 1800MM displacement sensor, one sensor bracket, and one 5-meter 3-core shielded signal wire. One electronic stopwatch
The electric pole load displacement tester is an instrument used for measuring the load characteristics and displacement changes of electric poles in tension, compression, and displacement. It has two digital LCD display windows, which respectively display the load force value and displacement value.