Carving factory polishing machine dust collectorIt is a dust removal equipment specially designed for polishing machines. It can remove the dust generated by polishing machines without affecting the operation of workers. The dust removal efficiency can reach 99%. This dust collector is small and exquisite, and can be designed to be mobileCarving factory polishing machine dust collectorIt facilitates the dust removal of mobile devices and provides a healthy working environment for staff.
The dust gas containing the carving factory polishing machine enters the lower ash hopper. Due to the gravity of the induced draft fan, the smoke rises to reach the filter bag, and the dust is trapped outside the filter bag to purify the smoke. The clean gas enters the bag and is discharged through the bag mouth and upper box body through the exhaust outlet. When the dust on the surface of the filter bag continues to increase, causing the resistance of the equipment to rise, the control instrument sends a signal according to the pre-set timing, and compressed air is sprayed into the bag through the pulse valve and the nozzle on the spray pipe in sequence from the air bag. Under the acceleration generated by the expansion of the filter bag and the reverse airflow, the dust attached to the outside of the bag separates from the filter bag and falls into the ash hopper. Dust is discharged through the ash discharge valve. The duration of one injection is 0.065-0.085 seconds, and after the injection is completed, the filter bag returns to the filtering state.