Brief introduction
The CYDK-I single point regulating pressure switch uses high-precision pressure sensors as detection elements and generates switch signals with high stability circuits to achieve continuous pressure measurement and switch quantity control. It has the advantages of high precision, low hysteresis, fast response, stable and reliable performance, small size, easy operation, and simple and flexible installation.
This product is widely used for pressure control of gases and liquids in industries such as chemical, mechanical, hydrological, and power. External intermediate relays can complete various control functions.
2、 Technical performance
Range of measurement |
-100…0~35…100(KPa) |
Supply voltage |
12-36VDC (calibrated value is+24VDC) |
0-2, 2060(MPa) |
Control accuracy |
≦±0.5%FS |
|
Overload pressure |
≤200%FS |
Long term stability |
≤±0.2%F. S/year |
Measurement medium |
Gas and liquid compatible with 316L stainless steel |
Response time |
≤1ms |
Output signal |
Switching signal |
Pressure interface |
M20 × 1.5 or user-defined |
Relay load |
30V/5ADC 240V/3A AC |
Explosion proofLogo |
ExiaIICT6 |
Range of upper and lower limit settings |
Single point adjustable within the range |
Protection level |
IP65 |
3、 Product Features
● 316L stainless steel isolation membrane structure
High precision, small hysteresis, fast response
● Single point adjustable, reliable switch signal
Strong anti-interference ability and good long-term stability
● Compact and exquisite, easy to install
4、 Exterior structure
5、 Product selection
CYDK-I |
Single point adjustment pressure switch |
||||||
G |
gauge pressure |
||||||
A |
Absolute pressure |
||||||
0~X (KPa or MPa) |
range |
||||||
J03 |
±0.3%FS |
||||||
J05 |
±0.5%FS |
||||||
C4 |
Single point switch signal |
||||||
C0 |
special |
||||||
M1 |
M20 × 1.5 external thread |
||||||
M2 |
G1/2 external thread |
||||||
M0 |
special |
||||||
F1 |
Husman connector outlet |
||||||
F0 |
special |
||||||
