Brief introduction
CYB13PC QiThe flat membrane pressure transmitter adopts a high-precision force sensing chip with imported stainless steel isolation diaphragm, which is excited byLight modulation resistance and certain signal processing, outputting industrial standard4-20mA signal. This product is mainly suitable for adhesive bondingMeasurement of thick medium pressure. The flat membrane structure of the sensor can prevent viscosityliquidBody blockage, scaling, and unhygienic conditionshappen. Sensor connection interfacedoThreaded type.This transmitter can be widely used in petroleum, chemical, coal mining, medicineAutomatic pressure control for gases and liquids in fields such as food and textileschangemeasuregivecontrol.
2、 Technical performance
Range of measurement |
0~35…100(KPa) |
0~12. 2020(MPa) | |
Overload pressure |
≤200%FS |
Measurement medium |
Various viscous media compatible with 316L stainless steel |
Output signal |
4~20mA two-wire system |
0~5VDC Three-wire | |
Supply voltage |
12-36VDC (calibrated value is+24VDC) |
accuracy |
±0.2%F.S ±0.3%F.S ±0.5%F.S |
Long term stability |
≤± 0.2% F.S/year |
Medium temperature |
-20~+85℃ |
Response time |
≤1ms |
Pressure interface |
M20*1.5 G1/2 |
Electrical interface |
Hessman connector |
Protection level |
IP65 |
3、 Product Features
● 316L stainless steel isolation membrane structure
●neatFlat film design suitable for viscous media
● High precision, high stability
● All stainless steel structure
●Threaded interface, easy to install
4、 Exterior structure

5、 Product selection
CYB13PC |
Flat membrane pressure transmitter |
||||||
G |
gauge pressure |
||||||
A |
Absolute pressure |
||||||
0~X (KPa or MPa) |
range |
||||||
J02 |
±0.2%FS |
||||||
J03 |
±0.3%FS |
||||||
J05 |
±0.5%FS |
||||||
C1 |
4~20mA output |
||||||
C2 |
0~5VDC output |
||||||
C0 |
special |
||||||
M1 |
M20×1.5External thread |
||||||
M2 |
G1/2External thread |
||||||
M0 |
special |
||||||
F1 |
Husman connector outlet |
||||||
F0 |
special |
||||||
